search

rommulaner / Anycubic_Vyper_LCD_CE_6.2

Firmware for Anycubic Vyper 3D-printer as Community Edition
39 stars 3 forks source link

Problems #1

Closed fauks closed 10 months ago

fauks commented 2 years ago

Both the screen and motherboard update seem to go smoothly. But once I'm at the home screen, it does not respond to any touches. When I restart the machine, it says its stuck and taking to long to load.

I'm using FAT32 4096 and have tried renaming the MB file with no success.

Any help would be appreciated!

fauks commented 2 years ago

So I have a different screen version. It takes a 4.5 config file and not 3.5. I was able to update that so the screen works now but it still freezes on bootup after the first boot. The first boot with the community firmware seems to work but then it freezes.

rommulaner commented 2 years ago

Shure that the MB was flashed OK? Light was flashing after it? My Vyper was ordered last December directly at Anycubic, so it should be the latest Version I think and there v3.5 is the only one that works for me.

fauks commented 2 years ago

Shure that the MB was flashed OK? Light was flashing after it? My Vyper was ordered last December directly at Anycubic, so it should be the latest Version I think and there v3.5 is the only one that works for me.

I'm positive. My screen uses DGUS2 v4.5.

The CR-6 repository has instructions and T5L_UI .bin files for both 3.5 and 4.5. I grabbed the file from their and the touch screen works again but the firmware will still not load.

I just flashed the latest CR-6 DWIN_SET folder with the 4.5 .bin file and the Vyper 6.1d firmware and now I'm able to use the menu but it looks like a CR-6 UI and not the Vyper one.

Can you help me figure out how to create a 4.5 DWIN_SET files that will work with the Vyper 6.1d MB firmware?

Here is where I found the information about the new screens.

https://github.com/CR6Community/CR-6-touchscreen#cr-6-touchscreen-firmware

I purchased this printer about a week ago.

rommulaner commented 2 years ago

You don't have to create a new DWIN, you just need to use the right cfg files in the folder an flash it. If you create a new DWIN set it is independent of the cfg files.

fauks commented 2 years ago

Well what files do I need to replace from the CR-6 DWIN_SET folder?

rommulaner commented 2 years ago

Use my DWIN and replace the .cfg file and test it. Make shure that there not 000 on all file on the Boot screen after flashing. Also when MB is flashed successfully the light is flashing.

fauks commented 2 years ago

What about the T5L_UI_V45.BIN file from the CR-6 DWIN_SET folder? That is the main file that fixed the touch screen to start working again.

fauks commented 2 years ago

Here are the two folders. image

fauks commented 2 years ago

Use my DWIN and replace the .cfg file and test it. Make shure that there not 000 on all file on the Boot screen after flashing. Also when MB is flashed successfully the light is flashing.

When I flash the MB, I hear the beeps and see the main menu and the light flashes once, then it's just solid. If I click anything, it freezes. When I restart, I get stuck on the loading screen.

rommulaner commented 2 years ago

I've just uploaded a folder with the two files from the origin Vyper 2.4.5 Version in the DWIN Folder. CFG_4.5

fauks commented 2 years ago

I've just uploaded a folder with the two files from the origin Vyper 2.4.5 Version in the DWIN Folder. CFG_4.5

Okay. So keep the T5L_UIV35*.BIN file from your DWIN_SET? I think the 4.5 version uses a different kernal according to the CR-6 page.

fauks commented 2 years ago

I tried both. When updating the MB firmware, I get the beeps and the light starts flashing. After restarting, it says the bootloader is confused and doesn't go to the menu.

Also when the MB firmware first finishes, all the text is stacked on top of each other.

rommulaner commented 2 years ago

Sorry just updated it again. Try some of the BIN files I added.

fauks commented 2 years ago

Sorry just updated it again. Try some of the BIN files I added.

Try the versions like V47? V40?

image

This won't brick the screen will it? haha

I appreciate you helping!

fauks commented 2 years ago

So far none of them are working.

fauks commented 2 years ago

Tried them all, none of them work.

fauks commented 2 years ago

This is where I found the V45 file. This file makes the ZombieStudio firmware work and it makes the CR-6 firmware work on the Vyper. The screen works at least, I doubt its actually functional as its made for a CR-6 and not the Vyper.

https://github.com/CR6Community/CR-6-touchscreen/releases/tag/61F_RC_260522_v1

"Attempt to extend the CR-6-touchscreen firmware to operate with DWIN display hardware flashed with and calibrated to run DGUS2 v4.5 or higher, such as those being sold with new CR6 machines as of approximately Dec 2021."

fauks commented 2 years ago

I figured it out. I created a CFG file to recalibrate the screen after flashing your DWIN_SET files. Then flashed the MB firmware, clicked setup, restore defaults, restarted and it finally booted back up into the menu instead of just hanging. Also, the instructions say to restart after flashing the MB then hitting setup - restore defaults. I had do this as soon as the MB was flashed before rebooting to get this to work.

fauks commented 2 years ago

https://drive.google.com/file/d/1y9C4EnhVUX0tlhf542gcb1bS942yHXh5/view?usp=sharing