search

rookidroid / hexapod

A 3D Printed Hexapod Robot
GNU General Public License v3.0
23 stars 7 forks source link

Small raiser for Servo's #3

Open SammieSamSam opened 2 days ago

SammieSamSam commented 2 days ago

I came to the conclusion that for some servo's, the servo becomes slightly raised and not in line with the print. so i made 2mm raisers that are really small, and go in between the servo and the legs. i put the STL and some images in the attachments in the form of a zip file :) hope it helps some people that want to build this hexapod too! accessory_small_spacer_mg90s.zip

SammieSamSam commented 2 days ago

I just realized i rescaled the stl im my slicer. sorry! it needs to be 11mmx5mmx5mm :) sorry for the inconvenience!

rookiepeng commented 2 days ago

I already have "accessory_spacer_mg90s.STL" in the model. Doesn't it work?

While using MG92B servo, the spacer is not needed. If you use MG90S, the spacer is needed.