[Issue]: Daikin Perfera entities not displayed

[stefanrusie]

Hi,

I've just installed daikin_residential and configured it, but after this successful operation I don't see any Daikin entities listed under this integration. From what I see in the logs, the token is correctly retrieved and the integration is connected to Daikin servers.

Also, I have deleted all entities from previous integration as I added a new AC with the new WiFi module (BRP069C4x). Attached you can find the debug logs from the integration. I have modified personal info and the token.

Home Assistant 2023.8.1 Frontend 20230802.0 - latest

manifest.json output:

"domain": "daikin_residential", "name": "Daikin Residential Controller", "version": "2.3.1", "documentation": "https://github.com/rospogrigio/daikin_residential/", "dependencies": [], "codeowners": [ "@rospogrigio" ], "issue_tracker": "https://github.com/rospogrigio/daikin_residential/issues", "requirements": [ "oic==1.6.0" ], "iot_class": "cloud_polling", "config_flow": true

Can you please help me or point the right direction?

Thank you!

home-assistant_daikin_residential_2023-08-09T14-48-01.128Z.log

[trullock]

What firmware are your units on?

The proper Onceta app will tell you

[stefanrusie]

The one which is not working has this unit software 20003002 and indorr unit EEPROM 12FC, firmware version 1_25_0 and WiFi module (BRP069C4x).

Another unit which I have previously integrated with HA has firmware version 1_14_84 and WiFi module BRP069B4x.

[trullock]

I have two Perferas with 1_12_84 which work, and it wants me to update to 1_25_0, which I shall hold off doing until this this resolved!

Are you savvy with software development? would be good to get the debugger attached. If so LMK and I can help you

[trullock]

I'll try and help you with this soon, for now that data includes your API tokens, i suggest you change your daikin account password and use whatever security feature they offer to invalidate past tokens before the internet starts controlling your AC :D

[stefanrusie]

Thanks for the heads up, did the recommended actions. I'm looking forward for a solution as soon as you'll sort it out for your Perfera ACs.

[radusimon84]

Hi There,

Wanted to let you know i probably expierience the same issue.

indoor unit software: 2000AF02 EEPROM: 1300 Wifi Module: BRP069C4x

If it is helpfull to provide some more info, please let me know.

Appreciating your help.

TNX

UPDATE: Ok, i’ve got it working now. I have no idea if what i did was the solution but it is working now. In the daikin app i had added my device as a airco unit instead of a specific perfera unit. So i removed the unit from the app and set up the wifi etc from scratch and added it to the app again.

[dimitridelanghe]

i can confirm that it is working :

BRP069C4x Firmware: 1.25.0 indoor unit software: 2003002 EEPROM 12FE

Added as Perfera AC (FTXM25R2V1B)

[jwillemsen]

I have extended another integration with support for reading all Daikin AC values (no control yet), maybe try https://github.com/jwillemsen/daikin_residential_altherma/tree/jwi-allsensorsupdate and see if that gives you values.

[stefanrusie]

Hi Johnny,

I have installed and configured this integration, but tnfortunately I cannot see any Daikin unit. Please see below screenshot:

[image: image.png]

Best regards, Stefan

On Fri, 8 Dec 2023 at 15:18, Johnny Willemsen @.***> wrote:

I have extended another integration with support for reading all Daikin AC values (no control yet), maybe try https://github.com/jwillemsen/daikin_residential_altherma/tree/jwi-allsensorsupdate and see if that gives you values.

— Reply to this email directly, view it on GitHub https://github.com/rospogrigio/daikin_residential/issues/163#issuecomment-1847153665, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANFAG5MOQRMTYKEEN6NYRLDYIMHRXAVCNFSM6AAAAAA3KEP726VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNBXGE2TGNRWGU . You are receiving this because you authored the thread.Message ID: @.***>

[jwillemsen]

I don't see a screenshot, please enable debug logging and attach the device diagnostics and log file here.

[jwillemsen]

Maybe you can try https://github.com/jwillemsen/daikin_residential_altherma/tree/jwi-climatecontrolrework, see also https://github.com/speleolontra/daikin_residential_altherma/pull/205, that integration now also has support for Daikin AC units, 95% ready

[trullock]

I can confirm my wall mounted and floor standing Preferas on firmware 1_28_0 work fine

[klausj1]

I have the same issue with BRP069C4x and two Perfera-Units. I can connect, but I do not get any devices. See attached log and diagnostics info. Please help! config_entry-daikin_residential-b9c2940b63d165b59628e63bfb3c379d.json.txt home-assistant.log

[jwillemsen]

Have you added them as a perfera ac as mentioned in some comments?

[jwillemsen]

Maybe a newer api version, in https://github.com/rospogrigio/daikin_residential/blob/7d6649841a9ca8f96059352fb43b99585e56af4e/custom_components/daikin_residential/daikin_api.py#L482 try v2 instead of v1, just a guess from my side

[jwillemsen]

@Daikin-europe, any insights?

[klausj1]

Have you added them as a perfera ac as mentioned in some comments?

OK, I see what you mean. Now I have Covid, and afterwards I will give it a try. Thanks!