search

roxas75 / rxTools

rxTools
http://www.rxtools.net/
GNU General Public License v2.0
266 stars 81 forks source link

8.1.0-10U Spider not working with beta-2 #436

Open dotdissent opened 8 years ago

dotdissent commented 8 years ago

Cleaned out my working 2.6 installation as directed in the readme and created the firmware file as well, then dropped the beta-2 files on the card. Upon booting the spider exploit via browser, it locks up after the load bar gets to the end and proceeds to freeze. Then, it crashes to the home menu with "An error has occurred."

My 3DS is an O3DS running 8.1.0-10U.

Syphurith commented 8 years ago

I'm pretty sorry but I suggest you to update your 3DS to 9.2.0-20U with DevMode/PastaMode. Support for special system version is obsolete and you may not receive good updates with 8.1.

MelonGx commented 8 years ago

8.1.0-10 is frankenfirmware. CakeHax has bad support about frankenfirmware. You can only try SSB cart upgrading to 9.2.0-10U and use HBL to boot/Sysupdater-upgrade your SysNAND.

mariogamer2 commented 8 years ago

Attention,one time,SSB updated my 2ds to 9.5.0!

MelonGx commented 8 years ago

Only a part of SSB carts have 9.2.0-20U upgrade pack bundled. Later & earlier won't have it. The safest method is buy a Sky3DS and burn a 9.2-confirmed SSB ROM on it.

mariogamer2 commented 8 years ago

Fu**\ sky3ds,use sysupdater

MelonGx commented 8 years ago

Fu**\ sysupdater. You can't boot rxTools on -10U browser so you can't use sysupdater without SSB 9.2/Sky3DS-burned-SSB 9.2. Unless mid-kid fixes CakeHax's frankenfirmware browser entrypoint, or 8.1->9.5->9.2.

mariogamer2 commented 8 years ago

Don't understand frankenfirmware...

Why people is getting in?

Update with cartdrige?

MelonGx commented 8 years ago

Frankenfirmware has two types. 1) Upgraded from a cartridge. 2) Downgraded from GWDG / Sysupdater. Both of them have some components unmatch to their main version.

1 mainly causes the Browser unmatch, which makes CakeHax unable to boot rxTools/other-CakeHax-enhanced-CFW from Browser.

2-GW mainly causes the H&C unmatch, which makes FBI injection unable to judge the correct TMD then make the injection error.

2-Sysupdater mainly causes random bricks or booting error on 9.3-10.3 -> 9.2 consoles.

urherenow commented 8 years ago

NOTHING can cause a brick by installing the browser.

MelonGx commented 8 years ago

Nobody talks about installing browser.

urherenow commented 8 years ago

That's what you need to do, nitwit.

urherenow commented 8 years ago

Anyway, you should close the issue. It's not the fault of rxTools that YOUR firmware isn't right.

MelonGx commented 8 years ago

You can't since frankenfirmware type 1 never allow CakeHax browser entrypoint to boot. You can only use GW browser entrypoint.

It's not my issue. I just want your devs to mention that cakehax has incompatible issues to frankenfirmwares (while GW doesn't). Otherwise noobs will repeat asking about how to use Browser to boot rxTools on frankenfirmwares.

urherenow commented 8 years ago

This is NOT a support forum. This is for rxTools issues. Use browserhax and NASA:

https://gbatemp.net/threads/release-nasa-universal-cia-manager-for-fw-4-1-10-3.409806/

Close the issue.

urherenow commented 8 years ago

Noobs will ask at gbatemp, not github. As it should be.

Sent from my iPhone

On Feb 26, 2016, at 14:03, MelonGx notifications@github.com wrote:

Otherwise noobs will repeat asking about how to use Browser to boot rxTools on frankenfirmwares.

― Reply to this email directly or view it on GitHub.

dotdissent commented 8 years ago

My 3DS was updated with a cartridge at some point in the distant past, never downgraded, and has worked with RxTools 2.x for a long while. I wouldn't know anything about Frankenfirmware because I never had an issue and the installation instructions listed on every RxTools page has never stated anything. If RxTools 3 can't be booted on various random firmwares then it should be pointed out in the RxTools readme because it's clearly a RxTools problem if the exploit works otherwise. I won't close this issue until the readme reflects something more detailed than "Requires ver 9.2 or older."

urherenow commented 8 years ago

Don't know who the hell you think you are, but the docs CLEARLY state "Also, rxTools does not work on every firmware. If it doesn't work for you, downgrade to 4.5 or upgrade to 9.2".

The devs are not here to please 1 person. If you don't like it or the docs, make your own.

dotdissent commented 8 years ago

"rxTools is a collection of hacking tools for Nintendo 3DS/3DSXL/2DS, compatible with all the system versions from 4.1 to 9.2"

"Support for Web Browser (SPIDER) entrypoint for Old 3DS (ver 4.1-9.2)"

It's not a matter of pleasing one person, it's a matter of having proper documentation to prevent user issues going forward. Also, please link the doc you're referencing, because that particular line doesn't appear to exist in the git Readme.

urherenow commented 8 years ago

Should be in the .zip file you downloaded. Otherwise, it's in the docs folder in the source.

https://github.com/roxas75/rxTools/blob/master/docs/rxTools.pdf

urherenow commented 8 years ago

Also, it's still beta. The docs will be sorted out when it's out of beta.