✨ Added support for building ABI3 wheels. cibuildwheel will now recognise when an ABI3 wheel was produced, and skip subsequent build steps where the previously built wheel is compatible. Tests still will run on all selected versions of Python, using the ABI3 wheel. Check this entry in the docs for more info. (#1091)
✨ You can now build wheels directly from sdist archives, in addition to source directories. Just call cibuildwheel with an sdist argument on the command line, like cibuildwheel mypackage-1.0.0.tar.gz. For more details, check the --help output (#1096)
🐛 Fix a bug where cibuildwheel would crash when no builds are selected and --allow-empty is passed (#1086)
🐛 Workaround a permissions issue on Linux relating to newer versions of git and setuptools_scm (#1095)
📚 Minor docs improvements
v2.4.0
✨ cibuildwheel now supports running locally on Windows and macOS (as well as Linux). On macOS, you'll have to install the versions of Pythons that you want to use from Python.org, and cibuildwheel will use them. On Windows, cibuildwheel will install it's own versions of Python. Check out the documentation for instructions. (#974)
✨ Added support for building PyPy 3.9 wheels. (#1031)
✨ Listing at the end of the build now displays the size of each wheel (#975)
🐛 Workaround a connection timeout bug on Travis CI ppc64le runners (#906)
🐛 Fix an encoding error when reading setup.py in the wrong encoding (#977)
🛠 Setuptools updated to 61.3.0, including experimental support for reading config from pyproject.toml(PEP 621). This could change the behaviour of your build if you have a pyproject.toml with a [project] table, because that takes precedence over setup.py and setup.cfg. Check out the setuptools docs and the project metadata specification for more info.
🛠 Many other dependency updates.
📚 Minor docs improvements
v2.3.1
🐛 Setting pip options like PIP_USE_DEPRECATED in CIBW_ENVIRONMENT no longer adversely affects cibuildwheel's ability to set up a Python environment (#956)
📚 Docs fixes and improvements
v2.3.0
📈 cibuildwheel now defaults to manylinux2014 image for linux builds, rather than manylinux2010. If you want to stick with manylinux2010, it's simple to set this using the image options. (#926)
✨ You can now pass environment variables from the host machine into the Docker container during a Linux build. Check out the docs for CIBW_ENVIRONMENT_PASS_LINUX for the details. (#914)
✨ Added support for building PyPy 3.8 wheels. (#881)
✨ Added support for building Windows arm64 CPython wheels on a Windows arm64 runner. We can't test this in CI yet, so for now, this is experimental. (#920)
🛠 Changed the escaping behaviour inside cibuildwheel's option placeholders e.g. {project} in before_build or {dest_dir} in repair_wheel_command. This allows bash syntax like ${SOME_VAR} to passthrough without being interpreted as a placeholder by cibuildwheel. See this section in the docs for more info. (#889)
🛠 Pip updated to 21.3, meaning it now defaults to in-tree builds again. If this causes an issue with your project, setting environment variable PIP_USE_DEPRECATED=out-of-tree-build is available as a temporary flag to restore the old behaviour. However, be aware that this flag will probably be removed soon. (#881)
🐛 You can now access the current Python interpreter using python3 within a build on Windows (#917)
v2.2.2
🐛 Fix bug in the GitHub Action step causing a syntax error (#895)
v2.2.1
🛠 Added a config-file option on the GitHub Action to specify something other than pyproject.toml in your GitHub Workflow file. (#883)
🐛 Fix missing resources in sdist and released wheel on PyPI. We've also made some internal changes to our release processes to make them more reliable. (#893, #894)
v2.2.1b1
🛠 Added a config-file option on the GitHub Action to specify something
other than pyproject.toml in your GitHub Workflow file. (#883)
🐛 Fix missing resources in sdist and released wheel on PyPI. We've made
some internal change to our release processes to make them more reliable.
(#893, #894)
v2.2.0
🌟 Added support for musllinux. Support for this new wheel format lets projects build wheels for Linux distributions that use musl libc, notably, Alpine Docker containers. (#768)
Musllinux builds are enabled by default. If you're not ready to build musllinux, add *-musllinux_* to your CIBW_SKIP/skip option. Or, you might have to make some changes to your options - to simplify that process, you can use...
✨ Added support for building ABI3 wheels. cibuildwheel will now recognise when an ABI3 wheel was produced, and skip subsequent build steps where the previously built wheel is compatible. Tests still will run on all selected versions of Python, using the ABI3 wheel. Check this entry in the docs for more info. (#1091)
✨ You can now build wheels directly from sdist archives, in addition to source directories. Just call cibuildwheel with an sdist argument on the command line, like cibuildwheel mypackage-1.0.0.tar.gz. For more details, check the --help output (#1096)
🐛 Fix a bug where cibuildwheel would crash when no builds are selected and --allow-empty is passed (#1086)
🐛 Workaround a permissions issue on Linux relating to newer versions of git and setuptools_scm (#1095)
📚 Minor docs improvements
v2.4.0
2 April 2022
✨ cibuildwheel now supports running locally on Windows and macOS (as well as Linux). On macOS, you'll have to install the versions of Pythons that you want to use from Python.org, and cibuildwheel will use them. On Windows, cibuildwheel will install it's own versions of Python. Check out the documentation for instructions. (#974)
✨ Added support for building PyPy 3.9 wheels. (#1031)
✨ Listing at the end of the build now displays the size of each wheel (#975)
🐛 Workaround a connection timeout bug on Travis CI ppc64le runners (#906)
🐛 Fix an encoding error when reading setup.py in the wrong encoding (#977)
🛠 Setuptools updated to 61.3.0, including experimental support for reading config from pyproject.toml(PEP 621). This could change the behaviour of your build if you have a pyproject.toml with a [project] table, because that takes precedence over setup.py and setup.cfg. Check out the setuptools docs and the project metadata specification for more info.
🛠 Many other dependency updates.
📚 Minor docs improvements
v2.3.1
14 December 2021
🐛 Setting pip options like PIP_USE_DEPRECATED in CIBW_ENVIRONMENT no longer adversely affects cibuildwheel's ability to set up a Python environment (#956)
📚 Docs fixes and improvements
v2.3.0
26 November 2021
📈 cibuildwheel now defaults to manylinux2014 image for linux builds, rather than manylinux2010. If you want to stick with manylinux2010, it's simple to set this using the image options. (#926)
✨ You can now pass environment variables from the host machine into the Docker container during a Linux build. Check out the docs for CIBW_ENVIRONMENT_PASS_LINUX for the details. (#914)
✨ Added support for building PyPy 3.8 wheels. (#881)
✨ Added support for building Windows arm64 CPython wheels on a Windows arm64 runner. We can't test this in CI yet, so for now, this is experimental. (#920)
🛠 Changed the escaping behaviour inside cibuildwheel's option placeholders e.g. {project} in before_build or {dest_dir} in repair_wheel_command. This allows bash syntax like ${SOME_VAR} to passthrough without being interpreted as a placeholder by cibuildwheel. See this section in the docs for more info. (#889)
🛠 Pip updated to 21.3, meaning it now defaults to in-tree builds again. If this causes an issue with your project, setting environment variable PIP_USE_DEPRECATED=out-of-tree-build is available as a temporary flag to restore the old behaviour. However, be aware that this flag will probably be removed soon. (#881)
🐛 You can now access the current Python interpreter using python3 within a build on Windows (#917)
v2.2.2
26 October 2021
🐛 Fix bug in the GitHub Action step causing a syntax error (#895)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.
Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
dependabot[bot]
commented
2 years ago
Bumps joerick/cibuildwheel from 1.9.0 to 2.5.0.
Release notes
Sourced from joerick/cibuildwheel's releases.
... (truncated)
Changelog
Sourced from joerick/cibuildwheel's changelog.
... (truncated)
Commits
0b63070Bump version: v2.5.061bcac8Merge pull request #1091 from mayeut/abi37599841Add tips+tricks entry for ABI3 building46702f5Space out the log statements a littleacc0796Merge remote-tracking branch 'origin/main' into abi3f324c9aMerge pull request #1096 from henryiii/henryiii/feat/sdistde44c88docs: add some projects (#1097)3505466refactor: review commentsb1e8549fix: minor cleanup958a7c3refactor: use single entry for SDist buildsDependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)