search

royo2015 / open-hardware-monitor

Automatically exported from code.google.com/p/open-hardware-monitor
0 stars 0 forks source link

support fintek F71889AD #432

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
getting a lot of bad sensor data using 5.1 beta 
datasheet for the chip here 
http://www.hardwaresecrets.com/datasheets/F71889.pdf
vcore/coretemp voltage is correct everything else is way off
http://cl.ly/MAcU/Image%202013-01-15%20at%202.54.11%20AM.png

Original issue reported on code.google.com by rjc862...@gmail.com on 15 Jan 2013 at 7:55

GoogleCodeExporter commented 9 years ago 
heres a smbus dump from Hwmonitor 1.21
http://cl.ly/MBrA/hwm_smbus.txt
as well and a side by side screen shot of hwMonitor 1.21 vrs Openhwmonit 5.1B
http://cl.ly/MC5c/Image%202013-01-15%20at%203.51.55%20PM.png
the 12v+ is not accurate I tested it against AIDA extreme and Aida reports 
12.30v

Original comment by rjc862...@gmail.com on 15 Jan 2013 at 8:53

GoogleCodeExporter commented 9 years ago 
report form openhw mon
 http://cl.ly/MBmx/OpenHardwareMonitor.Report.txt

Original comment by rjc862...@gmail.com on 15 Jan 2013 at 8:55

GoogleCodeExporter commented 9 years ago 
I have undated my own copy of Open-Hardware-Monitor and have added support for 
Fintek F71889. Who can I send my code to for a code review?

Original comment by elitteer1@gmail.com on 30 Jan 2013 at 1:36

Attachments:

GoogleCodeExporter commented 9 years ago 
@3 might I trouble you for your build so i might confirm

Original comment by rjc862...@gmail.com on 30 Jan 2013 at 1:48

GoogleCodeExporter commented 9 years ago 
Sure,

Can I upload it to this site?  Please send my an email as to how you can 
receive it.  Let me try to setup my FTP server so you can just grab it from 
there.

Original comment by elitteer1@gmail.com on 2 Feb 2013 at 11:08

GoogleCodeExporter commented 9 years ago 
I am not admin nor staff but you can send it to 
onemoar@gmail.com

Original comment by rjc862...@gmail.com on 2 Feb 2013 at 11:40

GoogleCodeExporter commented 9 years ago 
http://cl.ly/NbUy/Image%202013-03-15%20at%204.19.14%20PM.png

report
http://cl.ly/NaJ7/OpenHardwareMonitor.Report.txt
AIDA screenshot
http://cl.ly/NaFk/Image%202013-03-15%20at%204.22.41%20PM.png

Original comment by rjc862...@gmail.com on 15 Mar 2013 at 8:23

GoogleCodeExporter commented 9 years ago 
The Fintek F71889AD is correctly supported. The "issues" you see is missing 
information about the voltage dividers present on the mainboards you use. This 
information can be correctly retrieved only from the mainboard schematics, 
which are not publicly available in general. In certain cases the resistor 
values can be guessed, but this is quite error prone.

Original comment by moel.mich on 27 Jun 2013 at 8:23