search

rroller / dahua

Dahua Camera and Doorbell Home Assistant Integration
MIT License
368 stars 71 forks source link

Infrared LED issue with VTO2111D-P-S2 #132

Open mrjack711 opened 2 years ago

mrjack711 commented 2 years ago

Hi,

Thanks for this integration, it almost works perfectly for me.

I've been trying to set it up with a VTO2111D-P-S2 (https://www.dahuasecurity.com/products/productDetail/43037). The integration finds the devices and sets up the camera entities and sensors but the Infrared switch is not working.

For some reason, this device has infrared LEDs but they do not automatically come on when the light level goes down. Looking at the following API item: https://192.168.1.77/cgi-bin/configManager.cgi?action=getConfig&name=Lighting produces this result: table.Lighting[0][0].Mode=Off

Running this command: https://192.168.1.77/cgi-bin/configManager.cgi?action=setConfig&Lighting[0][0].Mode=On produces this result: table.Lighting[0][0].Mode=On and turns on the LEDs for a few seconds, then they automatically turn off again. The result goes back to table.Lighting[0][0].Mode=Off afterwards.

Running this command: https://192.168.1.77/cgi-bin/configManager.cgi?action=setConfig&Lighting[0][0].Mode=SmartLight produces this result: table.Lighting[0][0].Mode=SmartLight and turns on the LEDs for a few seconds, then they automatically turn off again. The result goes back to table.Lighting[0][0].Mode=Off afterwards.

Looking around on this forum ( https://ipcamtalk.com/threads/dahua-vto2111d-wp-information-and-hacking.22940/post-377381 ) it seems the device also turns on the LEDs when a call is made but i don't have a SIP server setup to test this. Do you know of any other API commands regarding the LEDs that can get around this?

If there are any other logs etc that I can provide for troubleshooting, please let me know.

dhcpy commented 2 years ago

Hello @mrjack711 I have the exact same device. Same problem with the LED. During a call the LED does turn on. You can install Dahua's android app, DMSS or gDMSS on a cellphone and add the VTO there. Then you press call and it does turn on.

The problem I have, apart from the LED, is that I can't get the button pressed binary sensor to work. How did you get that working?

itkfilelor commented 2 years ago

With my Amcrest floodlight, I needed to turn off the light (turn off SmartMode) from the app first, before I could use API commands. Might be worth a try?