Open pborsiak opened 10 months ago
I have read other posts and have installed suggested v 0.0.8 from beta stream, but cannot connect to the projector using it. version 0.0.7 works fine (but have no input selection)
Sorry, I probably overlooked your issue.
The commands you mention are implemented, it's probably your projector that's playing up.
Could you enable debugging and see if there's any thing that goes wrong?
They are available in what version ? Havent seen them in 007 amd 008 does not connecting to thevprojector as cannot connect to com port
It was available in one of the earliest versions, probably the first.
If you enable debug logging you're find more details on why it's not working
Is there anything in the log file that can help to resolve the issue?
We are just after move - will do my best to start connect projector before Sunday
On Wed, 26 Jun 2024, 10:07 pm rrooggiieerr, @.***> wrote:
Is there anything in the log file that can help to resolve the issue?
— Reply to this email directly, view it on GitHub https://github.com/rrooggiieerr/homeassistant-benqprojector/issues/10#issuecomment-2191806311, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCJWQM4HXD7ZYZ766GKBAC3ZJLDLTAVCNFSM6AAAAABJ3MXE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOJRHAYDMMZRGE . You are receiving this because you authored the thread.Message ID: @.***>
And by the way - what version should I use to test? Stable 7 or beta 8?
On Wed, 26 Jun 2024, 10:07 pm rrooggiieerr, @.***> wrote:
Is there anything in the log file that can help to resolve the issue?
— Reply to this email directly, view it on GitHub https://github.com/rrooggiieerr/homeassistant-benqprojector/issues/10#issuecomment-2191806311, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCJWQM4HXD7ZYZ766GKBAC3ZJLDLTAVCNFSM6AAAAABJ3MXE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOJRHAYDMMZRGE . You are receiving this because you authored the thread.Message ID: @.***>
Just go for the latest version
Oh my - there was a lots of development I see - I have stopped where v.007 was stable and v.008 was beta. Have just installed v.014 and try to test today
On Thu, 27 Jun 2024, 12:36 am rrooggiieerr, @.***> wrote:
Just go for the latest version
— Reply to this email directly, view it on GitHub https://github.com/rrooggiieerr/homeassistant-benqprojector/issues/10#issuecomment-2192169556, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCJWQM3NDWBQVXEZQAJYG6DZJLUZXAVCNFSM6AAAAABJ3MXE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOJSGE3DSNJVGY . You are receiving this because you authored the thread.Message ID: @.***>
Hi - I have connected projector to Serial and have connection now - projector is detected but still no input selection nor current selected input visible.
That looks quite allright. So you don't get any input selection if you open the media player entity?
SHIEEEEEEE....!!!
But still HDMI3 missing :)
Look at that.
To have all the options of your projector supported you can follow the instructions from the BenQ projector library
So you've got it working now over serial connection, does it also work using WiFi?
My projector have no WiFi (also have no COM-IP) - ATM it is in COM cable range, so ATM will stay with it.
Regards, Pawel Borsiak M: 0411298410
pt., 28 cze 2024 o 11:31 rrooggiieerr @.***> napisał(a):
So you've got it working now over serial connection, does it also work using WiFi?
— Reply to this email directly, view it on GitHub https://github.com/rrooggiieerr/homeassistant-benqprojector/issues/10#issuecomment-2196048763, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCJWQM5QKLTJLM27UCMOOX3ZJTKIZAVCNFSM6AAAAABJ3MXE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOJWGA2DQNZWGM . You are receiving this because you authored the thread.Message ID: @.***>
Look at that.
To have all the options of your projector supported you can follow the instructions from the BenQ projector library
Yeah - but how to get that under HAOS - from what I read I can ssh into container to install pip3 but this aneverything that is not in config will be wiped once HAOS update
You don't do that on HAOS, you can connect your projector to your pc/laptop and run the command from there
Ah - then I need to connect it to my C.H.I.P. with serial and debian on it
wt., 2 lip 2024 o 15:56 rrooggiieerr @.***> napisał(a):
You don't do that on HAOS, you can connect your projector to your pc/laptop and run the command from there
— Reply to this email directly, view it on GitHub https://github.com/rrooggiieerr/homeassistant-benqprojector/issues/10#issuecomment-2202230803, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCJWQM4LSLXF4MIO72PHK5DZKJMMRAVCNFSM6AAAAABJ3MXE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMBSGIZTAOBQGM . You are receiving this because you authored the thread.Message ID: @.***>
Hi - could you implement below commands for source set up