Closed yctn closed 5 years ago
What Version of libmbus you use? Directly cloned from GitHub or an older one?
I'm very skeptical that a gas meter communicate M-Bus via IR. They usually use different protocols for this. Please look at the device manual.
@Apollon77 directly cloned from github @lategoodbye hmm.. well it seems https://github.com/rscada/libmbus/issues/110 has done it. but i dont know how he connected it all upcause he uses the same device as i am using so it should be possible im only dont know how exacly
Not every meter of this type support M-Bus. You will need a suitable M-Bus communication module for this meter.
@lategoodbye the meter has a optical port on it so i plugged this on it:http://wiki.volkszaehler.org/hardware/controllers/ir-schreib-lesekopf-usb-ausgang
And it is really mbus protocol? Normally with IR you have D0 or such protocols
@Apollon77 to be honest i dont know but on another forum they told me it mbus https://www.gurux.fi/node/12944
Accordingto the datasheets i found wired mbus or wireless mbus is possible ... but both not using ir! I was not able to find Infos to ir at all. Do you have the exact datasheet for your device?
hmm so then i would need to buy a wireless mbus usb adapter?
this data sheets i have found https://www.landisgyr.eu/webfoo/wp-content/uploads/2012/09/Libra_350_i_data_sheet12.pdf https://www.landisgyr.eu/product/landisgyr-libra-350i-series/
libmbus hasn't been tested with wireless mbus. I assume it doesn't work.
Since we didn't sell you the meter, please contact your distributor which communication module is installed.
wireles mbus is different, so not directly compatible
Hello, im trying to read out my gas meter. it seems that someone already done it. https://github.com/rscada/libmbus/issues/110 i have a laptop with debian 9 installed. im using this as a IR head on the optical port on the gas meter. http://wiki.volkszaehler.org/hardware/controllers/ir-schreib-lesekopf-usb-ausgang
when i run mbus-serial-scan -b 300 /dev/ttyUSB0 i does not find any addresses so i dont know how i should proceed from here.
hope someone can advice me on this.