search

rstrouse / ESPSomfy-RTS

A controller for Somfy RTS shades and blinds
The Unlicense
429 stars 32 forks source link

Unable to find any signal when scanning frequencies #340

Closed Chaospilot1980 closed 1 month ago

Chaospilot1980 commented 2 months ago

Hardware

ESP32

Firmware version

v2.4.1

Application version

v2.4.1

What happened? What did you expect to happen?

I got everything running, initailizing the radio is done. But i cant find any signals at all. tried 4 different remotes, but the radio does not pcik up anything. not in logfilæes, not upon scan frequencies.

Wiring is: Radio Module - color - ESP32 board 1/GND - Grey - GND 2/VCC - Purple - 3,3 3/GDO0TX - Blue - 13 4/CSN - Green - 05 5/SCLK - Yellow - 18 6/MOSI - Orange - 23 7/MISO - Red - 19 8/GDO2RX - Brown - 12

20240421_205630 20240421_205535 20240421_205543 20240421_205554 20240421_205620 20240417_150354 20240417_150543 20240420_222851 71k3Qw8yTqL _AC_SL1500_ 71Jr8yBLq7L _AC_SL1500_

How to reproduce it (step by step)

1. Go to...
2. Click on...
...

Logs

No response

rstrouse commented 2 months ago

Ok I have determined that your wiring is correct if your radio pin settings look like this. image

Just to be sure your remotes do not say IO on them anywhere when your read the back of it. The led on RTS remotes will most often be red in color when you press a button on the remote. The radio for IO HomeControl is fundamentally different and will not work with this solution. This only works with RTS.

If that is the case verify that you also have 433.42mhz selected.

rstrouse commented 1 month ago

@Chaospilot1980 did you get your issue resolved?

rstrouse commented 1 month ago

@Chaospilot1980 I am going to close this for now. Feel free to reopen if you want to continue to troubleshoot.