The connection of the roller shutters is messed up

[sofiaundmarc]

I had an issue withe the esp32 Somfy and I deleted all of the shades (without unpairing them!!!) After I reintegrated the roller shutters, the following phenomenon occurred:

When I control roller shutter 1 via ESP: roller shutter 1 moves when I control roller shutter 2: roller shutter 1 and 2 move

I tried to change the remote adress of roller 2 but it didn´t help. I have now seen that the following is displayed when you want to delete the roller shutter: "... if this shade was previsously paired with a motor, you sould first unpair it from the motor and remove it from any groups. Otherwise its address will remain in the motor memory.." does the error have anything to do with this? how can i fix it?

[rstrouse]

Simple enough you simply need to remove the address for shutter 2 from the memory on shutter 1.

First open the memory for shutter 1 with your remote by long pressing the prog button until shutter 1 jogs. Then navigate to the virtual remote tab and select shutter 2 from the dropdown. Press the prog button and shutter 1 should jog exactly 1 time.

This will have removed the shutter 2 address from the shutter 1 motor.