nhorvath
commented
4 years ago Do you have weather scalling enabled? In the report you got what were the 2 scalling factors? What is the configured runtime for the zones that did not run?
On Thu, Aug 1, 2019, 12:22 AM srthimsen notifications@github.com wrote:
Running Sprinklers Pi V1.5.3 on a RPi 3b+.
I have 4 zones in my system. They are scheduled to run every 3 days, which has been working well for most of the summer. I've also set up the reporting script to notify me of the total run time of each zone. However, earlier this summer, I noted that it reported on a couple occasions that only 1 or 2 zones ran that particular day. I could manually trigger any zone and it worked without issue, so I chalked it up to a reporting script issue. I rebooted the Pi, and it seemed to work fine after that.
This morning, I received an email notification that only 2 of the zones ran. I checked the log file and found that 7 minutes into the schedule being run for zone 3, the Pi reports Starting v1.5.3.., and then, Turning off all zones. (see below).
[image: Screen Shot 2019-07-31 at 9 08 24 PM] https://user-images.githubusercontent.com/7494690/62265406-e488f700-b3d8-11e9-93f6-265fc47cce32.png
Has anyone else seen this?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/rszimm/sprinklers_pi/issues/150?email_source=notifications&email_token=AABIJXB5NJ53ACQ62BYWEH3QCJQGTA5CNFSM4IIMSR6KYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HCXAA2Q, or mute the thread https://github.com/notifications/unsubscribe-auth/AABIJXDJHUUFBVCSXFA7FK3QCJQGTANCNFSM4IIMSR6A .
srthimsen
Running Sprinklers Pi V1.5.3 on a RPi 3b+.
I have 4 zones in my system. They are scheduled to run every 3 days, which has been working well for most of the summer. I've also set up the reporting script to notify me of the total run time of each zone. However, earlier this summer, I noted that it reported on a couple occasions that only 1 or 2 zones ran that particular day. I could manually trigger any zone and it worked without issue, so I chalked it up to a reporting script issue. I rebooted the Pi, and it seemed to work fine after that.
This morning, I received an email notification that only 2 of the zones ran. I checked the log file and found that 7 minutes into the schedule being run for zone 3, the Pi reports
Starting v1.5.3.., and then,Turning off all zones.(see below).Has anyone else seen this?