Closed ArshaanTech closed 10 months ago
@ArshaanTech The CRSF protocol is implemented to work with ELRS recivers. It seems to be based on some legacy version of CRSF. If you are able to enable it in receiver or force it to generate SBUS signal, the it might work.
Oh okay i will try it... the elrs isn't working I'll try another receiver. I am using EP2 currently.
Are your pins correct? My setup works with ELRS
my pins were all correct but i couldn't get it to work, now I'm using a ppm receiver which is working good. Also, can the PWM output a 0-255 full like Arduino Uno or nano? i mean like not as in microseconds but can we output cycletime for mosfets? it would be really nice if u can implement it...
@ArshaanTech
get pin
ant then get serial
and paste result here@rtlopez
I am following the esp 8266 diagram, but I wonder how I want to connect to the receiver for the 8266? because I see the diagram has an rx ppm pin but I don't quite understand how it is connected. I hope you can post some pictures of them so I can understand better
docs/images/espfc_wemos_d1_mini_wiring.png
@khunglong207 esp8266 can only PPM, there is not enough UARTs in this chip. I wrongly assumed you were using esp32.
The crossfire RX receiver is receiving no input. The telemetry is connected and configured. The receiver is working with other F4 or F7 controllers. Any possible suggestions?