Closed jcarrete5 closed 5 years ago
When I use the x86_64 version of compile pal, it breaks my Arduino.js imstallation. I keep getting blue screens. Here is the crash log:
[ 271.998749] c0 555 Buffer I/O error on device loop1, logical block 52800 [ 271.998777] c0 555 Buffer I/O error on device loop1, logical block 52801 [ 271.998804] c0 555 Buffer I/O error on device loop1, logical block 52802 [ 271.998831] c0 555 Buffer I/O error on device loop1, logical block 52803 [ 271.998858] c0 555 Buffer I/O error on device loop1, logical block 52804 [ 271.998884] c0 555 Buffer I/O error on device loop1, logical block 52805 [ 271.998911] c0 555 Buffer I/O error on device loop1, logical block 52806 [ 271.998950] c0 555 EXT4-fs warning (device loop1): ext4_end_bio:286: I/O error writing to inode 1187910 (offset 40030208 size 106496 starting block 52781) [ 271.999112] c5 578 ext4_msg: 2 callbacks suppressed [ 271.999121] c5 578 EXT4-fs (loop1): Remounting filesystem read-only [ 271.999127] c5 578 ext4_e2fsck [ 271.999566] c5 29 ext4_reboot: reboot to run e2fsck [ 271.999632] c5 29 htc_reboot_block reboot_block.95: reason=6f656d22 msg=oem-22 save to /misc+00003800 [ 271.999745] c5 29 audit_printk_skb: 234 callbacks suppressed [ 271.999752] c5 29 type=1400 audit(1502189906.809:423): avc: denied { read write } for pid=29 comm="kworker/5:0" name="mmcblk0p32" dev="tmpfs" ino=10874 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1 [ 271.999777] c5 29 type=1400 audit(1502189906.809:424): avc: denied { open } for pid=29 comm="kworker/5:0" path="/dev/block/mmcblk0p32" dev="tmpfs" ino=10874 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1 [ 271.999855] c5 578 EXT4-fs error (device loop1) in ext4_evict_inode:242: Journal has aborted [ 272.000175] c1 578 EXT4-fs error (device loop1) in ext4_create:2262: IO failure [ 272.002503] c5 29 htc_reboot_block reboot_block.95: wrote reason: 6f656d22 [ 272.002550] c5 29 [notifier]notify_modem_app_reboot_call: notify modem app is rebooting/powering off [ 272.002593] c5 29 [notifier]set_oem_reboot_reason: reboot reason: 0x6f656d22. [ 272.002622] c5 29 [notifier]notify_modem_app_reboot_call: Modem did not powerup. Ignoring send smsm. [ 272.005033] c5 29 mdss_fb_release_all: try to close unopened fb 2! from pid:29 name:kworker/5:0 [ 272.005103] c5 29 mdss_fb_release_all: try to close unopened fb 1! from pid:29 name:kworker/5:0 [ 272.005456] c5 29 [DISP] mdss_dsi_panel_bl_ctrl:bl_level=0 [ 272.005498] c5 29 mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0 [ 272.152296] c5 29 [DISP] ++htc_hima_panel_power_off()++ [ 272.176506] c5 29 [DISP] --htc_hima_panel_power_off()-- [ 272.182297] c0 406 mdss_fb_set_par: mdss_fb_pan_idle failed. rc=-108 [ 272.182300] c0 406 detected fb_set_par error, error code: -108 [ 272.182500] c5 29 find_offmode_alarm: offalarm_size=10 rtc_now.tv_sec= 1502189907 [ 272.182531] c5 29 find_offmode_alarm: offalarm[0]=0 [ 272.182556] c5 29 find_offmode_alarm: offalarm[1]=0 [ 272.182579] c5 29 find_offmode_alarm: offalarm[2]=0 [ 272.182600] c5 29 find_offmode_alarm: offalarm[3]=0 [ 272.182621] c5 29 find_offmode_alarm: offalarm[4]=0 [ 272.182642] c5 29 find_offmode_alarm: offalarm[5]=0 [ 272.182662] c5 29 find_offmode_alarm: offalarm[6]=0 [ 272.182683] c5 29 find_offmode_alarm: offalarm[7]=0 [ 272.182703] c5 29 find_offmode_alarm: offalarm[8]=0 [ 272.182723] c5 29 find_offmode_alarm: offalarm[9]=0 [ 272.182744] c5 29 alarm_shutdown: offmode_alarm = 0 [ 272.195034] c5 29 [AUD] rt5506: rt5506_shutdown: enable gpio 921 [ 272.215149] c5 29 [AUD] rt5506: rt5506_shutdown: reset rt5501 [ 272.215180] c5 29 [AUD] rt5506: rt5506_write_reg: write reg 0x0 val 0x4 [ 272.218031] c5 29 [AUD] rt5506: rt5506_shutdown: disable gpio 921 [ 272.220254] c0 29 Restarting system with command 'oem-22'.
When I use the x86_64 version of compile pal, it breaks my Arduino.js imstallation. I keep getting blue screens. Here is the crash log: