Open ElDominio opened 3 weeks ago
@ElDominio I see a statement. I approve this statement.
What is the question? Are you looking to check if all 2chan rev G do the same? Something else?
Yes, I would like if others do the same, and if this is a software or hardware problem
Two RevFs I have tested in the same car boot properly, but VR does not work on them for reasons unknown
I found an old revG with 2023 firmware, and it was booting up fine. Updated to latest and revG does not boot loops and RARELY finishes booting. RevF boots fine
@ElDominio I have rev G and I am able to reproduce the issue. I have to confess that I was totally NOT expecting this to be a firmware issue.
@ElDominio I need help. Can you please run a binary search between official releases and/or daily builds and attempt to isolate the issue?
I've already downgraded to Dec2023 and still boot loop :(
the following are broken: 2023-04-19 June2023 is broken
2023-03-09 good
https://github.com/rusefi/rusefi/releases/tag/2023-04-03 OK
https://github.com/rusefi/rusefi/releases/tag/2023-04-10 OK
https://github.com/rusefi/rusefi/releases/tag/2023-04-16 OK
https://github.com/rusefi/rusefi/releases/tag/2023-04-17 OK
https://github.com/rusefi/rusefi/releases/tag/2023-04-18 bad
2023-04-19 bad
17 in file name is 16 in date_stamp?
firmwareInfo="rusEFI+v20230416%4054879" nPages="1" signature="rusEFI master.2023.04.17.alphax-2chan.3461928810"
rev F board is happy with latest firmware and 12v power supply
2024-10-06_11_23_51_236: EngineState: hellenBoardId=115
2024-10-06_11_24_11_341: EngineState: pin PE10 ((null)): EN Mode GP out AF0 Push-Pull No pull Speed Low IN 1 OUT 1
rev G is NOT happy with latest fw if started from 12v
2024-10-06_11_24_50_336: EngineState: hellenBoardId=210
2024-10-06_11_25_24_413: EngineState: pin PE10 ((null)): EN Mode GP out AF0 Push-Pull No pull Speed Low IN 1 OUT 1
@ElDominio shit that's https://github.com/andreika-git/hellen-one/issues/353
please remove two capacitors from rev G boards to have them boot. So far our software attempts to fix have failed
rev F i have it happy
rev G is happy after removal
fix confirmed!!!b
I have a revGboot looping if powered from 12V, but works fine if first powered by 5v.
I have tride Full DFU Erase and reloading firmware, but not improvement