rev E test log - Githubissues

rusefi / alphax-2chan

24 pin / 2 channel ECU

2 stars 4 forks source link

rev E test log #76

Closed rusefillc closed 1 year ago

rusefillc commented 1 year ago

PROG button works - blue LED blinks
works from external +12v power supply seems happy! https://github.com/andreika-git/hellen-one/issues/246
+5 goes out
TPS sensor works - OPEN QUESTION WHAT analog mux considerations we have here?!
two injectors are clicking in bench test
SD card does NOT work so far probably firmware needed?

@ElDominio FYI

rusefillc commented 1 year ago

Fun fact - this rev E has on-board baro (another one, not the on-board MAP) and on-board accelerometer (maybe without firmware support?!)

See https://github.com/rusefi/alphax-2chan/issues/87

Qwerty-OFF commented 1 year ago

SD card is now connected to SPI1

Edit: this is now https://github.com/rusefi/rusefi/issues/5067

rusefillc commented 1 year ago

@ElDominio did you have a chance to put one on a real vehicle? VR vehicle or non VR vehicle?

ElDominio commented 1 year ago

Tomorrow, dual hall

Question, eevE is first with SD right?

rusefillc commented 1 year ago

Need a VR test as well :)

mck1117 commented 1 year ago

Need a VR test as well :)

All VR since forever is broken without the extra caps bodged on, which should happen to every pre-0.4-vr ECU out there if you want to use VR on it.

rusefillc commented 1 year ago

@mck1117 somehow we had happy VR experience on some cars?

@ElDominio did we have any happy VR vehicles on Alpha?

mck1117 commented 1 year ago

One edge was better than the other. If you are wired to use the good edge and lucky enough, it'd usually work without the caps. Unlucky or wired backwards you need the caps to get a usable signal at all.

rusefillc commented 1 year ago

@ElDominio poke need real vehicle 2chan rev E results please