Closed ElDominio closed 9 months ago
rev C
#define H_SPI1_SCK Gpio::B3
?
fixed
16/29 MIL GOOD channel 17
Setting ADDR 1
sending line=18 value=1
ADC says HIGH 18@0 3.065v
sending line=18 value=0
ADC says LOW 18@1 0.169v
sending line=18 value=1
sending line=18 value=0
17/29 Tach GOOD channel 18
Setting ADDR 2
sending line=19 value=1
ADC says HIGH 19@0 3.066v
sending line=19 value=0
ADC says LOW 19@1 0.003v
sending line=19 value=1
sending line=19 value=0
18/29 X8 AuxLS1 GOOD channel 19
I have a boost controller solenoid wired to Aux LS1 and it is not responding. Seems to me PB3 is used to trigger it?