Closed ElDominio closed 1 year ago
I do not see one cylinder on the picture :( Do you have "show only trigger" or whatever is that checkbox enabled?
"focus on inputs" was selected, my bad
I can now see for some reason cylinder 2 and 4 not firing
In individually wired wasted, it runs better but the car still misfires
can you try some old firmware and see if it's different/better/worse?
On july 3
Same, car is misfiring quite a bit at idle
did this car not do this before, but does now? seems like car hardware problem
Sounds like time to https://github.com/rusefi/rusefi/issues/4485
@ElDominio did we ever hard-code a somewhat good tune to at least star a car? or is this one very not OEM?
Sounds like time to rusefi/rusefi#4485
the trigger looks pretty okay to me, but it certainly can't hurt
This car runs perfectly fine on a Haltech PNP though, I just swapped it in and it runs perfectly.
I recorded videos of both but you can only hear crickets lol
timing similar? fuel pulse width similar? throttle position similar?
for reference
I'll see if i can make it run similarly (this runs seq ignition i know it barely makes a difference)
WIth these values it's idling extremely lean, even though pulsewidth it .3ms more; richening it back to 14s doesn't really make it much better
are we sure the other ECU is running sequential fuel? is it making 2 pulses per cycle or 1?
1 pulse per cylce, can scope it if you need (pnp Haltech comes locked to Sequential anyways)
Idk, after running for a while seems fine, still running individually wired wasted btw
Just pushed global spark and injection counters into logs https://github.com/rusefi/rusefi/commit/cecc5a9d6e7614f94aee6edaaab32fc9a97d1df1 just to have more, more, MORE data in the logs
Close
The car pretty much runs like the picture shows (one cylinder?)
Log: https://rusefi.com/online/view.php?log=1000