Please provide happy rev B tune & log

[rusefillc]

ideally on "20221209_release" but any tune & log of happy vehicle with functional rev B board would work

[Ankyth]

Log 2-1-23 RevC fix.zip

[mck1117]

capture an SD card tooth log too if you can - that is the ground source of truth that the ECU sees.

[rusefillc]

Talking to Ray on the phone Ray says he is looking at 6 boards all with while molex (meaning rev C) in front on him

[rusefillc]

Ray says four boards have two small capacitors removed, two boards still have small capacitors.

[rusefillc]

@Timbelom three boards should be in NJ soon

• please write unique IDs on these boards Feb1, Feb2, Feb3

• current assumption is that one board has 4.7K array not soldered well, please add solder

• two boards are in different states of not being modified

• remove caps https://github.com/rusefi/hellen154hyundai/issues/72

• remove diode+transistor, install 0R

• replace resistor array

[rusefillc]

@Timbelom says five boards have arrived @Timbelom says two boards do not have #72 fix labeled "f2" and "f3" @Timbelom says board with most modifications is now labeled "f1"

[rusefillc]

F4 board

[Timbelom]

F4 solder added

[Timbelom]

F3 & F2 capacitors removed

[Timbelom]

F1, F2 & F3 replaced resistor arrays to 4.7K

[Timbelom]

F2 & F3 crank channel removed diode+transistor, installed 0R

[rusefillc]

F3 & F5 both cam channels removed diode+transistor, installed 0R

[Ankyth]

F3 and F5 work as intended, both read cam and crank. F2 reads crank but no CAM

[rusefillc]

Hallelujah! Let me modify two more boards to best spec and ship to PR.

[rusefillc]

Hallelujah! Let me modify two more boards to best spec and ship to PR.

https://tools.usps.com/go/TrackConfirmAction?tRef=fullpage&tLc=2&text28777=&tLabels=9405511206214367533690