Closed rusefi closed 4 years ago
0.4.7 has a minor mistake that the wrong side of that jumper is the default
it should be cut & soldered/jumpered to the "vdda" side
@mck1117 says "I'd just toss it Just tie vref to avdd, no jumper"
This is obsolete, suggest closing this issue
JP1 to vref with 6.8K/10K divider is not happy :( vref point measures 2.48 not expected 2.99
@mck1117 says "0.5v thru a 6.8k resistor is 75uA
Typical draw on vref during ADC conversion is 300uA"