search

rusefi / rusefi-hardware

13 stars 19 forks source link

single WBO rev 3 PCB is a little too large #151

Open rusefillc opened 1 year ago

rusefillc commented 1 year ago

https://github.com/rusefi/rusefi-hardware/tree/main/wideband-F103

rev 3 is 57.8 wide 66.4 mm long

width has to be below 54.2 mm

please cut 1.8mm on both sides of the PCB thus shrink PCB width by 3.6mm

looks like length is OK but let's trim 0.5 just to be a bit more sure

Please do not forget to change silk version from 3 to 4

rusefillc commented 1 year ago

@Nadezhda-n also at least four capacitors were added under #153 and some stm32 pins were moved around, looking for update PCB to match current schematics :)

Nadezhda-n commented 1 year ago

done :)

rusefillc commented 1 year ago

@dron0gus please review in term of capacitors

@Nadezhda-n please confirm that you had a chance to try your gerbers. Please generate gerbers/bom/CPL and push into "rev 4" folder"

Nadezhda-n commented 1 year ago

added folder export/rev4

rusefillc commented 1 year ago

@Nadezhda-n please change

U11,U12 part number to C840103