quad DDPAK igbt

[rusefillc]

Same as https://github.com/rusefi/rusefi/tree/master/hardware/DDPAK_breakout just four channels and with JLC assembly option

0805 pull-down signal and inline resistors

four input pads/holes diameter = 1.2mm

four output pads/holes diameter = 1.2mm

one GND pad/hole diameter = 2mm

"quad IGBT v 0.1" silkscreen

[rusefillc]

See also https://github.com/rusefi/hellen154hyundai/

[rusefillc]

@Nadezhda-n please PR into https://github.com/rusefi/rusefi-hardware/tree/main/quad-igbt folder :)

[Nadezhda-n]

[rusefillc]

@Nadezhda-n у GND будет дырочка P9?

[rusefillc]

@Nadezhda-n R2 в оригинале между R1 и IGBT

а стало 100K снаружи 1K

кажется удобнее и более гибко будет R2 между R1 и IGBT

[Nadezhda-n]

[Nadezhda-n]

@Nadezhda-n please PR into https://github.com/rusefi/rusefi-hardware/tree/main/quad-igbt folder :)

Посмотри, верно ли тебя поняла :)

[rusefillc]

@Nadezhda-n it looks great!

Please add "rusefi.com" silkscreen on the back and push JLC fab files

@Qwerty-OFF please review

[rusefillc]

@mck1117 @dron0gus does this need capacitors like https://github.com/andreika-git/hellen-one/issues/207#issuecomment-1336519453 ?

[dron0gus]

@rusefillc this capacitor is in feedback circuit, not base

[rusefillc]

we have the boards