I have a new TP1080WC purchased within the last month. It works well with
Easyweather and Cumulus when configured as "Fine Offset (WH1080 etc).
I am using OpenWRT (Firmware Version: OpenWrt Attitude Adjustment 12.09 / LuCI
0.11.1 Release (0.11.1) Kernel Version 3.3.8) and Fowsr 1.0-20110904-1
on TP-Link TL-MR3020 V1.
I cannot get a response from the WH1080 with or without an external USB Hub.
This is what I see:
root@OpenWrt:~# fowsr -w
00414764 | 00 00 00 00 __ __ __ __ __ __ __ __ __ __ __ __ | ....
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
fowsr: fowsr.c: 95: CUSB_Open: Assertion `dev' failed.
Aborted
root@OpenWrt:~#
I seem to be talking to the USB Port on the TP1080WC as it reads the IdV and
IdP.
root@OpenWrt:~# lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.8 ehci_hcd
iProduct 2 Generic Platform EHCI Controller
iSerial 1 ehci-platform
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Device Status: 0x0001
Self Powered
Can anyone give me a suggestion of where to go next?
Thanks
Doug
Original issue reported on code.google.com by dougd.h...@gmail.com on 1 Jun 2014 at 3:53
Original issue reported on code.google.com by
dougd.h...@gmail.com
on 1 Jun 2014 at 3:53