This issue just to store image - Githubissues

ryannining / karyacnc

CAM and control machine from Chrome, path from Inkscape directly using extension

GNU General Public License v2.0

12 stars 4 forks source link

This issue just to store image #1

Open ryannining opened 6 years ago

ryannining commented 6 years ago

ryannining commented 6 years ago

ryannining commented 6 years ago

ryannining commented 6 years ago

ryannining commented 6 years ago

ryannining commented 6 years ago

ryannining commented 5 years ago

ryannining commented 5 years ago

ryannining commented 5 years ago

ryannining commented 5 years ago

ryannining commented 5 years ago

ryannining commented 5 years ago

ryannining commented 5 years ago

jagdishjadeja commented 5 years ago

how to run this in localhost ?

ryannining commented 5 years ago

Just download, extract and open index.html on chrome

Or oprn chrome extension, enable.developer mode. Then click load unpacked extension. Select the folder that have index.html and click select folder

Then oprn chrome://apps

ryannining commented 4 years ago

ryannining commented 3 years ago

New feature:

Manual cutting tab

Manual movement

ryannining commented 3 years ago

Profile load/save It will save all the settings (all input, checkboxes, combo box)

New warning system, to inform if to much path is lost (for example small text using not to small end mill). it will inform and put red color around it

ryannining commented 3 years ago

Engraving angle

ryannining commented 3 years ago

Multiple angle engrave. Angle is configured on the Stroke Green color. The Blue still FF or 80 (half DPI). if green is 0, it will be replaced with configuration on the karyacnc Inkscape Option.

Same angle will be combined, different angle will be overlayd.

ryannining commented 3 years ago

Laser power (reality is depend on firmware)

Latest karyacontroller support Constant laser burn, its mean that each motor stepper step, it burn only for defined time (microseconds) if the power is less than 100%. Great for marking/ engraving which prevent overburn on corners (when the motor accelerate/decelerate)