Not running very well on N1 - CM 5.0.3-N1

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Install Kwaak 3 on a N1 with CM 5.0.3-N1
2. Run it (With or Without sound)
3.

What is the expected output? What do you see instead?
Was hoping for a nice and smooth framerate (wasn't expecting any movement
controls though XD)

What i see / hear is:
VERY low framerate - like, 1 FPS or less even
When sound is enabled, every sound is played 5 times (atleast)

What version of the product are you using? On what operating system?
"Latest and Greates BETA"

Please provide any additional information below.

Original issue reported on code.google.com by t0yk4t on 25 Feb 2010 at 7:23

[GoogleCodeExporter]

I noticed on the Nexus One that the default level is very slow, but if you 
select any
other level, it runs great... just need some way to MOVE instead of look around 
:)

Original comment by timho...@gmail.com on 25 Feb 2010 at 7:41

[GoogleCodeExporter]

Correct the default level is very heavy but other levels aren't that heavy. I 
don't
have access to a Nexus One, so I can't say what's wrong. In this bug report
(http://code.google.com/p/kwaak3/issues/detail?id=1) someone is using Kwaak3 to 
view
network games. The framerate looks quite good. I'm not sure if OpenGL is 
working well
on your phone.

It can also be that I need to adjust my OpenGL code a little bit. Right now 
Android
is setting it up for me but I heard that on some phones the default OpenGL 
settings
(the default EGL config is crap) but I'm not sure if that's the case here. I 
don't
have a Nexus One here.

Original comment by thunderb...@gmail.com on 25 Feb 2010 at 7:51

[GoogleCodeExporter]

If you select 'Skirmish' instead of 'Fight', you can select the other levels, 
which
run very quick - or just check out the Demo from the main screen.

Original comment by timho...@gmail.com on 25 Feb 2010 at 7:53

[GoogleCodeExporter]

Hey, thanks for the quick responses and stuffs.
Still trying to figure out where kwaak reads the key from so i can copy my 
"q3key"
from "quake\ 3/baseq3/" to wherever it's supposed to go - Since you can't enter 
any
text on keyboard-less phones atm XD

Original comment by t0yk4t on 25 Feb 2010 at 8:07

[GoogleCodeExporter]

I can comfirm that the other levels in skirmish mode are running perfectly on 
my N1

And, can confirm issue 11 on the N1 aswell
Textures turn white - characters are red blocks!

Original comment by t0yk4t on 25 Feb 2010 at 8:10

[GoogleCodeExporter]

The key isn't really needed unless you want to play online I think. If you want 
to
place the key somewhere it should be in /sdcard/quake3/qkey (so not in
/sdcard/quake3/baseq3/qkey).

Original comment by thunderb...@gmail.com on 25 Feb 2010 at 8:26

[GoogleCodeExporter]

I tried taking the q3key and putting it on /sdcard/quake3/qkey
(Just pushing the file there)
And doesn't seem to work - i still get the popup to enter the key atleast.
Tried putting it in
/sdcard/quake3/q3key
aswell as
/sdcard/quake3/baseq3/q3key
Haven't tried
/sdcard/quake3/baseq3/qkey
yes, so might do that in a few...

Original comment by t0yk4t on 25 Feb 2010 at 8:32

[GoogleCodeExporter]

This is awesome!
I got it working on my N1
Now, if only I could move

Original comment by David.1...@gmail.com on 26 Feb 2010 at 3:32

[GoogleCodeExporter]

Use the test version I added, you can move in there if you map the volume / 
camera
keys to movement in the controls menu of the game.

Original comment by thunderb...@gmail.com on 27 Feb 2010 at 11:44

[GoogleCodeExporter]

I have it working fairly well on my N1.

When I first ran it (the non beta version):
-with sound, choppy
-frame rate was very low
-fairly unplayable since I could not move

I upgraded to the beta version and:
-turned off sound
-went into options and turned down the detail and a few other options
-set the volume keys to move forward and backward

Now it is somewhat playable. The frame rate is up there and not choppy. I can 
move 
around quite well. I can also aim and fire fairly well. However, I can only do 
one of 
these at the same time. I move by using the volume button and the screen to 
look. 
When I am aiming I also use the screen but use the trackball as a trigger. This 
can 
lead to pretty good results facing a single easy computer. 

Thanks so much for your work thunderbird2k, this is really impressive.

If there were just a few more buttons on the N1, this would be a fully playable 
game.

Original comment by evanshel...@gmail.com on 27 Feb 2010 at 7:53

[GoogleCodeExporter]

Nice work.  I have the demo levels running smoothly on my N1.

To make it playable, it needs accelerometer support.  Tilting the phone by a 
certain 
amount in one direction should activate either the A W S or D key depending on 
the 
direction tilted.  At a 45 degree angle it should activate nothing.  The 
feature 
could be enabled or disabled from the opening menu in the same way that sound 
is 
enabled or disabled.

It also needs tap zones in the four corners of the screen that can be key 
mapped and 
can be enabled or disabled the same way.

Keep up the good work.

Original comment by aldina...@gmail.com on 28 Feb 2010 at 12:46

[GoogleCodeExporter]

I agree with aldina112. Accelerometer and on screen keys. Somebody did 
something 
similar to this at:

http://sites.google.com/site/quake2android/

and he has released his source code for how he did it too:
http://quake2android.googlecode.com/svn/trunk/

Hope this project keeps on moving forward!

Original comment by evanshel...@gmail.com on 3 Mar 2010 at 1:02

[GoogleCodeExporter]

Hmm I wonder how well a wiimote would work
http://www.intomobile.com/2010/05/10/nexus-one-wii-remote-donkey-kong-country-an
droid-gaming-win.html

Unfortunately I do not have a wii atm.

Original comment by incu...@gmail.com on 11 May 2010 at 4:33