search

rzeldent / esp32cam-rtsp

Simple RTSP (streaming image) server for the ESP32CAM. Easy configuration and monitoring through the web interface.
663 stars 121 forks source link

ESP32-CAM MB Error 261 #118

Closed thorstensd closed 7 months ago

thorstensd commented 7 months ago

Hello,

I have just stumbled across this error and cannot explain it. I have already successfully installed an ESP32-S before. However, I have no idea what could be the problem with this ESP32-CAM-MB.

Failed to initialize the camera! Result: 261 (ESP_ERR_NOT_FOUND) Please check hardware or correct the camera settings and restart.

Upload Log: esp32cam_espressif_esp_eye SUCCESS 00:00:26.547 esp32cam_espressif_esp32s2_cam_board FAILED 00:00:08.169 esp32cam_espressif_esp32s2_cam_header FAILED 00:00:08.211 esp32cam_espressif_esp32s3_cam_lcd FAILED 00:00:10.270 esp32cam_espressif_esp32s3_eye FAILED 00:00:12.324 esp32cam_freenove_wrover_kit SUCCESS 00:00:26.824 esp32cam_m5stack_camera_psram SUCCESS 00:00:27.230 esp32cam_m5stack_camera SUCCESS 00:00:26.396 esp32cam_m5stack_esp32cam SUCCESS 00:00:26.992 esp32cam_m5stack_unitcam SUCCESS 00:00:26.737 esp32cam_m5stack_unitcams3 FAILED 00:00:10.760 esp32cam_m5stack_wide SUCCESS 00:00:26.226 esp32cam_seeed_xiao_esp32s3_sense FAILED 00:00:10.864 esp32cam_ttgo_t_camera SUCCESS 00:00:26.513 esp32cam_ttgo_t_journal SUCCESS 00:00:26.535

Did somebody have a Idea how to fix it?

BR, Thorsten

rzeldent commented 7 months ago

All the firmwares are built. You nned to install the correct one for your device. Looking at the logging above, I suspect the last one is uploaded (esp32cam_ttgo_t_journal SUCCESS 00:00:26.535) From the PIO menu select the device your're using...

thorstensd commented 7 months ago

Ok, I will check. I´m not very familiar with this, so sorry for my questions. I need no to learn how to do it with visual code and how to find out which ESP I have. Its only written ESP32S and the ESP32MB Board.

Thank you so far.

rzeldent commented 7 months ago

Take a look at the documentation, the pictures to know what board you have... Then, in VIsual studio select in the PlatformIO the board you're using and use that to only build or upload the board you're using...

Hope this helps.

image

thorstensd commented 7 months ago

Thank you - your info gave me the right direction.

I was able to to fix it to build it with the OI CLI: C:\Users\myusername\.platformio\penv\Scripts\pio.exe run -e esp32cam_ai_thinker --target upload

BR Thorsten

rzeldent commented 7 months ago

Glad you managed to solve this and indeed, using the command line is maybe even easier!

Enjoy!