search

s60sc / ESP32-CAM_MJPEG2SD

ESP32 Camera motion capture application to record JPEGs to SD card as AVI files and stream to browser as MJPEG. If a microphone is installed then a WAV file is also created. Files can be uploaded via FTP or downloaded to browser.
GNU Affero General Public License v3.0
931 stars 214 forks source link

Can't connect via AP #273

Closed GSternik closed 1 year ago

GSternik commented 1 year ago

I have that's logs from console: [00:00:00.712 infoSD] SD card type SDHC, Size: 58.6GB [00:00:00.712 listFolder] Sketch size 1.5MB [00:00:01.005 listFolder] SD_MMC: 1024 bytes used [00:00:01.006 loadConfig] Load config [00:00:01.009 ERROR @ prefs.cpp:135] Failed to load file /data/configs.txt [00:00:01.022 WARN retrieveConfigVal] Key hostName not set [00:00:01.022 WARN retrieveConfigVal] Key AP_SSID not set [00:00:01.219 prepCam] Camera init OK for model OV2640 on board CAMERA_MODEL_AI_THINKER [00:00:01.220 WARN retrieveConfigVal] Key framesize not set [00:00:01.486 setWifiSTA] Wifi Station IP from DHCP [00:00:01.501 WARN startWifi] SSID not available, use AP [00:00:01.504 onWiFiEvent] Wifi AP stopped: ESP-CAM_MJPEG_9993F92DE6B4 [00:00:01.505 onWiFiEvent] Wifi AP SSID: ESP-CAM_MJPEG_9993F92DE6B4 started, use 'http://192.168.4.1' to connect [00:00:04.529 startPing] Started ping monitoring - On [00:00:04.534 startWebServer] Starting web server on port: 80 [00:00:04.536 startStreamServer] Starting streaming server on port: 82 [00:00:04.538 prepRecording] To record new AVI, do one of: [00:00:04.548 prepRecording] - press Start Recording on web page [00:00:04.548 prepRecording] - move in front of camera

[00:00:04.558 setup] Camera model OV2640 on board CAMERA_MODEL_AI_THINKER ready @ 20MHz [00:00:04.559 checkMemory] Free: heap 107612, block: 81908, pSRAM 2567431 [00:00:06.819 isNight] Night time [00:00:09.530 resetWatchDog] WatchDog started using task: ping

I can not connect to 192.168.4.1. First versions of the ESP32-CAM_MJPEG2SD. My module is typic ESP-32-Cam with OV2640 camera. I see access point in my computer network settings, when the AP is established connection to my module is not possible. I tried with different boards setting with library - ESP32 - v.2.0.09. - v.2.0.12

s60sc commented 1 year ago

see #265

GSternik commented 1 year ago

I notice this: [00:00:01.009 ERROR @ prefs.cpp:135] Failed to load file /data/configs.txt

is this a problem? All seems ok, I can connect with AP, but 192.168.4.1 is not available. I tried char ST_SSID in utils.cpp and password. Module can not connect to router. When I flashed with earlier version was ok. Now it can not work with older version and older esp32 board library.

GSternik commented 1 year ago

I fixed this problem. Probably it was hardware settings of my computer. I tried to make connection with another computer. I can change AP connection to my router than it is working well. Thanks for help. ps. I have the same board with this code and I can't start webserver, This is log: ELF file SHA256: 240cbf561d4c9e26

Rebooting... ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1344 load:0x40078000,len:13936 load:0x40080400,len:3600 entry 0x400805f0 Guru Meditation Error: Core 1 panic'ed (IllegalInstruction). Exception was unhandled. Memory dump at 0x400de4dc: 0008e0c9 0000701d 5d004136 Core 1 register dump: PC : 0x400de4e0 PS : 0x00060330 A0 : 0x8008ed8b A1 : 0x3ffbcd30
A2 : 0x3ffc4bdc A3 : 0x00000008 A4 : 0x00000001 A5 : 0x00000000
A6 : 0x3ffbc878 A7 : 0x80000001 A8 : 0x800de4e0 A9 : 0x3ffbcd10
A10 : 0x00000000 A11 : 0x00060023 A12 : 0x00060023 A13 : 0x80000000
A14 : 0x007bf538 A15 : 0x003fffff SAR : 0x00000000 EXCCAUSE: 0x00000000
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
Backtrace: 0x400de4dd:0x3ffbcd30 0x4008ed88:0x3ffbcd50

Where is the problem?

GSternik commented 1 year ago

After change flash frequency to 40MHz camera continuously rebooting : Rebooting... ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1344 load:0x40078000,len:13936 load:0x40080400,len:3600 entry 0x400805f0 E (576) esp_core_dump_flash: 枮"յ⸮⸮data check failed: Calculated checksum='964f8b52' Image checksum='3ad11fdf' =============== ESP-CAM_MJPEG 8.8 =============== [00:00:08.306 infoSD] SD card type SDHC, Size: 29.7GB E (819) esp_image: Checksum failed. Calculated 0xa read 0x33 [00:00:08.307 listFolder] Sketch size 0 bytes [00:00:08.607 listFolder] File: /data/configs.txt, size: 4191 bytes [00:00:08.612 listFolder] File: /data/common.js, size: 26704 bytes [00:00:08.616 listFolder] File: /data/MJPEG2SD.htm, size: 78631 bytes [00:00:08.616 listFolder] SD_MMC: 28.8GB used [00:00:08.627 loadConfig] Load config [00:00:08.703 updateAppStatus] Disabling motion detection [00:00:08.706 printResetReason] Software reset due to exception/panic [00:00:08.706 printWakeupReason] Wakeup by reset E (971) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND) [00:00:09.148 prepCam] Camera init OK for model OV2640 on board CAMERA_MODEL_AI_THINKER abort() was called at PC 0x40091aeb on core 0 Backtrace: 0x40084319:0x3ffde8d0 0x40091af5:0x3ffde8f0 0x400981a9:0x3ffde910 0x40091aeb:0x3ffde990 0x40145614:0x3ffde9b0 0x401456c1:0x3ffde9e0 0x401790ea:0x3ffdea00 0x401798cb:0x3ffdea20 0x40177ee4:0x3ffdea40 0x401dcd1d:0x3ffdea60 ELF file SHA256: 56b0bbab9be50ddb

J-SIT commented 1 year ago

Hello all. I also had problems that it wanted to connect to my AP again and again. I found out that it was probably due to the special characters in my WLAN password. But with letters, numbers and minus it works fine.

Many greetings

Julian