DPL-830 PBMC isolation bed verification

[KatyTaylor]

User story As a user of the scRNA Core Banking pipeline, I would like bed verification support for the "LRC Blood Bank" plate to the "LRC PBMC Bank" plate transfer, to try to avoid lab mistakes.

Who are the primary contacts for this story Lesley, Katy

Who is the nominated tester for UAT Lesley

Acceptance criteria To be considered successful the solution must allow:

• [ ] Robot name: Hamilton PBMC Isolation
• [x] Robot type: Hamilton STAR
• [x] LRC Blood Bank plate is scanned as source plate into bed 15
• [x] LRC PBMC Bank plate is scanned as destination plate into bed 10

Dependencies This story is blocked by the following dependencies:

• https://github.com/sanger/limber/issues/1310

[Lesley84]

LRC PBMC Bank plate is scanned as destination plate into bed 12 - this needs to be corrected to bed 10

[Lesley84]

I'm happy with this story

[KatyTaylor]

For bed verification, see: config > robots.rb app > models > robots

[andrewsparkes]

Wasn't sure what the acceptance criteria for Robot name was for. Are we setting up a robot in SS? We have a convention for naming the bed verifications which I've followed.

[KatyTaylor]

Wasn't sure what the acceptance criteria for Robot name was for. Are we setting up a robot in SS? We have a convention for naming the bed verifications which I've followed.

I got the name from the R&D diagram - I'll check in Slack with them