search

sanjoyg / dirigera_platform

HomeAssistant Integration for Dirigera Platform
MIT License
72 stars 8 forks source link

No screen config #1

Closed Minimixmax closed 5 months ago

Minimixmax commented 5 months ago

I did as described in the documentation, and I was able to install the integration, however I cannot get to the configuration screen. So I can't save the IP address. Home assistant v2024.1.5 HACS v1.34.0

sanjoyg commented 5 months ago

Hi can you confirm that you have the dirigera hub, could you paste debug logs

Minimixmax commented 5 months ago

hello, I made a mistake. so I was able to add the integration. once the integration was added, I had the configuration screen but none of my lamps were recognized after adding the IP address and pressing the button

sanjoyg commented 5 months ago

hello, I made a mistake. so I was able to add the integration. once the integration was added, I had the configuration screen but none of my lamps were recognized after adding the IP address and pressing the button

Can you please enable debug and configure again and paste the logs please

sanjoyg commented 5 months ago

Please try version 1.1 and let me know

Minimixmax commented 5 months ago

Hello, I installed version 1.1 and no problem. I see all my light. I have an opening sensor in my possession, I will test it later (not yet connected). Do you think you can integrate the temperature sensor: VINDSTYRKA ? (maybe later) Thank you for the work already done, to my knowledge it is the only direct integration that I have found.

Le mer. 31 janv. 2024 à 14:48, sanjoyg @.***> a écrit :

Please try version 1.1 and let me know

— Reply to this email directly, view it on GitHub https://github.com/sanjoyg/dirigera_platform/issues/1#issuecomment-1919137589, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABD2QPG56TOTGUPFVT3N343YRJDSVAVCNFSM6AAAAABCOBEMMCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJZGEZTONJYHE . You are receiving this because you were assigned.Message ID: @.***>

sanjoyg commented 5 months ago

Hello, I installed version 1.1 and no problem. I see all my light. I have an opening sensor in my possession, I will test it later (not yet connected). Do you think you can integrate the temperature sensor: VINDSTYRKA ? (maybe later) Thank you for the work already done, to my knowledge it is the only direct integration that I have found. Le mer. 31 janv. 2024 à 14:48, sanjoyg @.> a écrit : … Please try version 1.1 and let me know — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABD2QPG56TOTGUPFVT3N343YRJDSVAVCNFSM6AAAAABCOBEMMCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJZGEZTONJYHE . You are receiving this because you were assigned.Message ID: @.>

That is great news, if you could send me the JSON for the temperature sensor using the service call. Will get that integrated and make a release

sanjoyg commented 4 months ago

@Minimixmax added support for VINDSTYRKA Environment Sensor