iNdependence 1.2.5 OpenSSH install + Installer.app OpenSSH install are conflicting

[GoogleCodeExporter]

What I do were uninstall the SSH from iNdependence 1.2.4 and install the 
openSSH from 
iNdependence 1.2.5......

Now I can only use the SFTP to connect to the iPhone. File transfer between my 
Mac and iPhone was 
fine.

Also, SSH login fine, but everytime I enter 'any' command (ex. ls, cd), the 
connection will closed.....

Please anyone can tell me how to fix.

Thanks

Original issue reported on code.google.com by rickysu...@gmail.com on 22 Oct 2007 at 6:58

[GoogleCodeExporter]

My iPhone was running Firmware 1.1.1 with BSD base system installed.

Thanks

Original comment by rickysu...@gmail.com on 22 Oct 2007 at 7:00

[GoogleCodeExporter]

My Mac was G4 running 10.4.10

Original comment by rickysu...@gmail.com on 22 Oct 2007 at 7:02

[GoogleCodeExporter]

Fixed by reinstalling the BSD subsystem.

Also... anybody wants to upgrade the iNdependce to 1.2.5 must be warned!

Original comment by rickysu...@gmail.com on 22 Oct 2007 at 7:22

[GoogleCodeExporter]

Warned about having to reinstall the BSD System?

Original comment by ygoodfri...@gmail.com on 22 Oct 2007 at 12:35

[GoogleCodeExporter]

I make no guarantees about compatibility between iNdependence and Installer.app 
since I don't use it.

However, now that I take a look at the list of files Installer.app uses for 
it's OpenSSH installation, I can see what 
the problem is.  I'll try to figure out a way to resolve this.

Original comment by dial.ope...@gmail.com on 22 Oct 2007 at 1:19

• Changed title: iNdependence 1.2.5 OpenSSH install + Installer.app OpenSSH install are conflicting
• Changed state: Accepted

[GoogleCodeExporter]

For now, just pick one or the other to install (either the Installer.app 
version or the iNdependence version, not 
both).  As long as one of them is installed and working, then iNdependence will 
be able to use it.

Original comment by dial.ope...@gmail.com on 22 Oct 2007 at 1:48

[GoogleCodeExporter]

Thanks!

Original comment by rickysu...@gmail.com on 22 Oct 2007 at 4:53

[GoogleCodeExporter]

I picked iNdependence version (1.2.5), and i still cant SSH into iphone with 
Fugu or
Cyberduck, customization in iD keeps giving me error message when I try to 
install
ANYTHING into my iphone

this is the message:

Failed
Couldn't connect to SSH server. Ensure IP address is correct, phone is
connected to a network, and SSH is installed correctly.

Original comment by wayne...@gmail.com on 22 Oct 2007 at 9:45

[GoogleCodeExporter]

Just downgraded back,
iD's open ssh doesnt work with 1.0.2 either. therefore its not letting me SFTP 
with
fugu either. Op: I had to activate twice in 1.2.5 inorder to activate my 1.0.2 
iphone.

Resolution:
I had to go with installer's BSD and Open SSH. Everything works again... except 
im
still stuck with 1.0.2 firmware.

Original comment by wayne...@gmail.com on 22 Oct 2007 at 9:48

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

how do i install installer.app onto my iPhone when i've got 1.1.1? i've already
jailbroken it using iNdependence

Original comment by msilver1...@gmail.com on 23 Oct 2007 at 12:31

[GoogleCodeExporter]

try installing SSH from iNdependence, then use the customize tab to install the
installer.app

This didn't work for me, supposedly it should, lets see if it does for you.

Original comment by wayne...@gmail.com on 23 Oct 2007 at 12:41

[GoogleCodeExporter]

So I tried to get this to work, and still can't get open ssh to work with my 
phone. 
I know i have connection and everything is right. The weird thing is the 
time-out of 
the pre-1.1.1 varies greatly. sometimes it goes for a while then sometimes iD 
shuts 
me right out saying its can't connect to SSH. 

So im still stuck in 1.0.2. Is open SSH and BSD sub working for people from 
installer app? Or should I remove both of those and try open SSH from 
independence? 
I'm dying to get this to work.

Original comment by Tung.Lu...@gmail.com on 23 Oct 2007 at 5:20

[GoogleCodeExporter]

Did you remember to turn your phone off (slide to turn off) and NOT reboot 
during the
ssh install? If not, install it again.

Original comment by virtuoso...@gmail.com on 24 Oct 2007 at 2:10

[GoogleCodeExporter]

I could never get iNdependence to work. iJailBreaker worked. iJailBreaker gives 
instructions to use the "slide to 
power down." Try using the slider with iNdependence.

Original comment by sassy...@gmail.com on 24 Oct 2007 at 3:09

[GoogleCodeExporter]

I dont know if it has anything to to with it but after installing installer, my 
battery started to drain really fast! 
What should I do if I already installed iNdependence and Installer? Is there 
any way 
to formar my iphone?

Original comment by diego.ja...@gmail.com on 24 Oct 2007 at 2:02

[GoogleCodeExporter]

Used iNdepedence 1.2.5 to get a 1.1.1 iPhone with SSH.  Installed installer.app 
but 
cannot get BDS Subsystem 1.5 to install. Gives me an "Error - Package download 
failed!"  Any help?

Original comment by cbosw...@gmail.com on 24 Oct 2007 at 5:48

[GoogleCodeExporter]

I had a 1.0.2 and used old version of iNdep. to activate it and install SSH.. 
worked perfect with all 3rd party 
apps. after apptapp install.. Yesterday i upgraded to 1.1.1 with iNdep. with 
pre-1.1.1 and also activated it 
with iNdep. everything runs fine. But then i wanted to install SSH again (which 
says install success after the 
two reboots) so i could get installer.app into the phone but i cant connect. no 
matter what i do. and i know 
the connections are how they should be..

Also. i did not unlock my iPhone yet, not in 1.0.2 and not in 1.1.1.. so virgin 
baseband or what its called...

Anybody kno w a solution to the SSH problem? or do we wait for iNdep. upgrade?

Original comment by m.pia...@mac.com on 24 Oct 2007 at 6:16

[GoogleCodeExporter]

Hello everybody !
Apart from SSH connection problem due to the conflict between iNdependence and 
Installer, There is a very 
tricky point, that i can't solve, even after having spent hours in many english 
or frenchforums :

If our iphone is in 1.1.1, how could it be possible to install "Installer" ? 
because Installer is supposed to be 
install on a 1.0.2 iPhone....

And how to understand/consider "Installeur V3" : it's a version design for 
iphone 1.1.1 but it is just an update, 
that requiered "Installer" to be installed... CRAZY, isn't it ?????

If anyone as a solution....

Original comment by clarka...@gmail.com on 25 Oct 2007 at 8:15

[GoogleCodeExporter]

Couldn't remove entry from /Users/cherrydcherryd/.ssh/known_hosts.  Please edit 
that
file by hand and remove the line containing your phone's IP address.
Where i can find this file? many thanks for help

Original comment by tranhong...@gmail.com on 25 Oct 2007 at 9:33

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

clarkaime:

1. Download AppTapp installer from here:
http://www.nullriver.com/~zigzag/AppTappInstaller.zip

2. Unzip the AppTappInstaller.zip file

3. If you are on a Mac, right click on AppTapp Installer.app and select Show 
Package Contents.  Then go to 
Contents --> Resources.  You will see a Installer.app.  Transfer this 
Installer.app using iNdepedence to your 
phone.

or

If you are on Windows/Linux, open a command prompt or shell prompt.  Then:
cd AppTapp Installer.app  (this is just a directory/folder)
cd Contents
cd Resources
You will see  a folder/directory called Installer.app.  Transfer this to your 
iPhone. 

Original comment by changren...@gmail.com on 25 Oct 2007 at 4:45

[GoogleCodeExporter]

ma...@eklectic.net:

Reinstalling the OpenBSD subsystem should fix your problem.

Original comment by changren...@gmail.com on 25 Oct 2007 at 4:47

[GoogleCodeExporter]

problem with ssh from independence is easely solved by this routine... instal 
ssh, change or not password, then 
go to fugu or cyberduck and open connection... leave the program open and then 
go to independence and do the 
pre 1.1.1. upgrade or what you are up to. after upgradeto 1.1.1, do usual 
jailbreak and as mr. changrenyong 
advise transfer apptapp on the phone using independence or cyberdack-fugu in 
applications folder. start 
installer and update to version 3, install bsd, go to independence delete ssh, 
restart and install open ssh from 
installer. 

Original comment by keith.he...@gmail.com on 25 Oct 2007 at 11:24

[GoogleCodeExporter]

instalin bsd from version 3 has small problems because of a bug in new 
installer... easealy resolved by ste....

http://blog.psmxy.org/

Original comment by keith.he...@gmail.com on 25 Oct 2007 at 11:27

[GoogleCodeExporter]

keith.helterskelter - does your routine actually work?  your last comment is a 
bit confusing...

Original comment by henryeug...@gmail.com on 26 Oct 2007 at 3:40

[GoogleCodeExporter]

yeah it really is abit confusing but sounds possible!
is there not a better solution right now?

Original comment by moritz...@gmail.com on 26 Oct 2007 at 4:46

[GoogleCodeExporter]

i have firmware 1.0.0 , and my phone still virgin .
i install indep. 1.3.beta.2 and everythings were fine until i open the 
application ,
and want to activate and jailbreak my phone . 
For doing such thing the application said that select where you have unzip your
firmware file , 
so i dl the restore file 1.1.1 and again do this , but i couldn't locate my 
unzipped
fireware file , plz help me !!!

Original comment by mik...@gmail.com on 24 Nov 2007 at 7:10

[GoogleCodeExporter]

@operator@dialectro.com: on Oct 22, 2007 you wrote you had found the problem. 
Can 
you describe in detail what the problem is? Are there some conflicting files?

Original comment by beat.za...@gmail.com on 18 Dec 2007 at 9:10

[GoogleCodeExporter]

Bought an iphone october in the States, it was still 1.02. Upgraded to 1.1.1 
and than used iNdependence 1.25 
and anySim 1.1 After the second try everything (youTube, Bluetooth, Wifi, 
Battery lasts long, etc.) worked and 
is still perfect. I removed anySim and installed Fugu. Exchanged the 
M68AP.plist (using phone in germany), 
the calendar changed, suddenly I had contacts next to itune and some words are 
in german. Have not 
installed any other programm yet

Now I want to install Installer.app. The tip is to remove SSH.
So do I have to use iNdependence 1.2.5 if I want to work on my phone or can I 
use 1.3.1?
Is there a difference in using iNdependence 1.2.5 or 1.3.1 concerning SSH?
In iNdependence 1.3.1, I can remove SSH, SFTP and SCP. Should I do that that 
before installing Installer app. 
and how can I be sure that it got deinstalled?
Do I need SFTP and/or SCP or does both get installed once I install 
Installer.app?

Original comment by rock...@compuserve.com on 7 Jan 2008 at 3:16

[GoogleCodeExporter]

To diego.jacome
my brother had the same thing.
he just left the phone off for 3 days,
powered it up battery was timed.
It took:
6 hours 13 min. 12 sec. to drain.
I don't know if this will work for you.

Original comment by kamil.ra...@gmail.com on 2 Aug 2009 at 6:06