Open GoogleCodeExporter opened 8 years ago
unlock how via aireplay-ng ?
Original comment by kostad...@yahoo.com
on 30 Jan 2013 at 7:13
No after the lockout i was using the wireless manager to try to connect to
the ap(with a random password), when it fails it must reset the lockout so
i could carry on firing wpa pins.
Original comment by jordanc....@gmail.com
on 30 Jan 2013 at 3:52
nop, it dosn't work for me:
[!] WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking
[!] WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking
[!] WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking
over and over again
:(
Original comment by kostad...@yahoo.com
on 2 Feb 2013 at 1:23
I think I understand what you mean
I was doing (again "I think", cause I'm not sure)
the same trick using aireplay-ng.
In my case (my AP lockout after 5 false attempts for 530sec):
*1st > manualy set the channel for the mon:
# iwconfig <mon device> channel <channel #>
*2nd > use aireplay-ng for the association process and sending keep alive
packets every 60sec (add -A to reaver):
#aireplay-ng -1 60 -a <AP's BSSID> -h <mon's mac> -e <AP's ESSID>
<mon device>
*3rd >
#reaver -i <mon device> -b <AP's BSSID> -e <AP's ESSID> -c <channel
#> -N -S -A -v
Original comment by i.boud...@gmail.com
on 2 Feb 2013 at 3:01
Yeah i tried on another router and didn't work so must be only on some of
them that it works.
Original comment by jordanc....@gmail.com
on 3 Feb 2013 at 12:52
I found another way!
U should use same MAC as already associated client
Original comment by kostad...@yahoo.com
on 15 Feb 2013 at 8:55
cool does it work on all routers? how many routers have u tested it on
Original comment by jordanc....@gmail.com
on 20 Feb 2013 at 6:49
HI, and MAC how to change :)how to find it, where to see it ... regards
Original comment by m_ili...@abv.bg
on 16 Apr 2013 at 7:03
first put your wireless card off ifconfig wlan0 down then
macchanger -r wlan0 (the -r means it will make a random mac address)
then do ifconfig wlan0 up your good to go.
Original comment by jordanc....@gmail.com
on 19 Apr 2013 at 9:03
btw ifconfig will give you your mac address just look under wlan0 and
hardware
Original comment by jordanc....@gmail.com
on 19 Apr 2013 at 9:05
Hi again, now i have .cap(47.4 MB)file but with aircrack this fail not existimg
in dictionary:pentest/psspords/wordlist/dark0de...,now I dont know what i
do.regards.
Original comment by m_ili...@abv.bg
on 20 Apr 2013 at 11:57
I dont really use aircrack but if you put aircrack -h it will give you a
peramentor to specify a dictionary . Just put the dictionary files path.
Original comment by jordanc....@gmail.com
on 20 Apr 2013 at 12:01
hey someone can answer ap rating limiting 60 seconds error for us?
Original comment by t4kokari...@gmail.com
on 6 Jul 2013 at 1:04
I have the same error except the percentage progresses...affect the result?
Original comment by josuel...@gmail.com
on 7 Aug 2013 at 2:06
i keep getting this same problem ! (warning ap limit) can anyone help me ?
also reaver keeps trying the same pin over and over .
if anyone could help me with these 2 issues im having it would be greatly
appreciated
Original comment by Dipp...@gmail.com
on 12 Nov 2013 at 8:45
I have a quite simple solution to this:
# reaver -i <Mon device> -b <BSSID> -vv -L
Original comment by sagid.qu...@gmail.com
on 13 Nov 2013 at 5:54
try this "minidwep-gtk-40420"
Original comment by downt...@parkcitywireless.com
on 22 Dec 2013 at 1:54
sky routers lock for 1 hour
talktalk done lock
dont no about homehubs yet
Original comment by gavinowe...@gmail.com
on 22 Mar 2014 at 8:21
reaver is finished pretty much all new routers are either locking out after
failed attempts or require WPS to be manually turned on(i.e. not on by
default).
Original comment by jordanc....@gmail.com
on 23 Mar 2014 at 10:47
homehub 5 dont seem to lock out yet
Original comment by gavinowe...@gmail.com
on 25 Mar 2014 at 9:22
I have found an effective way to flood Access Point rate limit pins by flooding
it for 10-20 seconds.
Check the following links to see how i carried out the attacks!
https://www.youtube.com/watch?v=hHVPSJn4Fqo
https://www.youtube.com/watch?v=_uVvi8qf7JY
Original comment by repzerow...@gmail.com
on 18 Apr 2014 at 4:11
Thats quite interesting nice work.
Original comment by jordanc....@gmail.com
on 18 Apr 2014 at 8:48
thank you
Original comment by repzerow...@gmail.com
on 20 Apr 2014 at 1:24
hey guys well if u got ap rate limit u have to wait 360 second thats ok . witch
mean as soon this router well locked it self and u well get this error recive
time out :D . so now to make the router restart him self you need to disconnect
the router by using mdk3
Original comment by ka3bo...@gmail.com
on 16 May 2014 at 1:01
SCRIPT FOR UNLOCK WPS WARNING: Detected AP rate limiting, waiting 60 seconds
before re-checking
https://www.youtube.com/watch?v=3KviQTiVmuw
Original comment by slma...@abv.bg
on 27 Jun 2014 at 6:50
hi guys i tried this code and its work for me but it take a long time..
reaver -i mon0 -b xx:xx:xx:xx:xx:xx -c (ch) -a -L --dh-small -vv -d 5
replace xxxxxx with ap bssid and repalce ch with channel of the ap to looks
like.
reaver -i mon0 -b 99:77:55:44:00:11 -c 11 -a -L --dh-small -vv -d 5
you will never see error ( WARNING: Detected AP rate limiting, waiting 60
seconds before re-checking ) but its take long time but you will get the
password :)
Original comment by arabiccr...@gmail.com
on 19 Aug 2014 at 3:43
comment #26 seems to be working for some routers but it is not working for
actionteh v1000 router. actionteh stops progress after .09%, any solution? it
seems to be automatialy locking up the wps with this (#26) command, any work
around?
Original comment by marktwo...@gmail.com
on 22 Aug 2014 at 12:45
wa
Original comment by EmailDab...@googlemail.com
on 27 Sep 2014 at 6:34
Comment #26 doesnt work for my TP-Link (W8970). Never changes the PIN it is
trying.
Original comment by JCRule...@gmail.com
on 9 Nov 2014 at 4:40
[deleted comment]
i start to get results with #26 arabiccr...@gmail.com tips but im stuck at
0.14% pin 00045674
Original comment by onlies...@gmail.com
on 24 Nov 2014 at 4:34
hello every1.
i have a NETGEAR router with WPS enabled.
to crack a WPS Pin with reaver it is taking 2 to 10hrs with 30sec delay.
to success a flood attack it is taking 20sec where i can save only 10sec only
per 1 PIN.
1) whats are the solutions to save more time
2) Along with MAC Address Change Script For Every pin.
Thanks to every1 who replied and viewed
Original comment by lokeshre...@gmail.com
on 3 Dec 2014 at 4:34
It depends, some have hard set limits, no matter where the pin try is coming
from, it will only allow so many per second. Also some routers like mine, are
absolutely terrible, and can only handle so many pin tries at a time before
they crash and burn. You are lucky mine took 6 hours and the router has no hard
limits :)
Original comment by jordanc....@gmail.com
on 3 Dec 2014 at 3:28
[deleted comment]
I took 8 days with many pause, resume to compete till 99.99 % on a DLINK
router. First 4 digits are 0105 so I reached at 90% on first day.
Reaver has competed all 1000 pins from 0105000 - 0105999.
I have read all d comments and now getting confused,
Well will some one plzzz help me, what should I do next, because with a great
patience I reached on 99.99 % :)
Plz help me ....
Original comment by Heman...@gmail.com
on 26 Mar 2015 at 7:30
Seems like no one have tried this, reaver 1.4 with built-in mac changer.. Works
great for me.
https://github.com/gabrielrcouto/reaver-wps
Original comment by hassaan....@gmail.com
on 20 Apr 2015 at 3:42
i tried all methods but did not find any solution of cracking ap rate limiting,
what to do
http://www.hackingdream.net/2014/08/all-methods-and-types-of-wifi-hacking.html
Original comment by BhanuNam...@gmail.com
on 28 Apr 2015 at 12:23
Original issue reported on code.google.com by
jordanc....@gmail.com
on 29 Jan 2013 at 9:28