Closed GoogleCodeExporter closed 8 years ago
I'm sorry to hear that. What version of ElectricSleep did this occur on? Did it
work for you in the past, and if so, on what versions? Also what phone/device
are you using.
Original comment by jondwil...@gmail.com
on 26 Dec 2010 at 1:11
Original comment by jondwil...@gmail.com
on 26 Dec 2010 at 2:24
Hi,
I just re-installed electricsleep on a Samsung Naos (my Galaxy S got stolen :|)
and I have the same problem.
Calibrating works, I remember that sleep graph was shown when I went to sleep,
but this morning at got woken up exactly at the time of my alarm and there was
no sleep graph…
I tried again with different settings and none of them resulted in the sleep
graph being shown. The calibration wizard still work…
Then I tried it this morning at work in order to do a logcat and it seems to
work again…
Original comment by victor.n...@gmail.com
on 12 Jan 2011 at 8:50
Can you do me a huge favor and check if 'Force Screen On' is on/if the
calibration wizard sets it to true?
If so, then your screen MUST be kept on in order to track sleep. Otherwise,
there's something else going on. Since Electricsleep now dumps sleep data to
internal storage as it needs to, it may be that it can't access that for some
reason.
Original comment by jondwil...@gmail.com
on 12 Jan 2011 at 1:40
Hi, yes, it seems linked to the screen: tonight I kept it on (with force screen
on)
What is strange is that the calibration software didn't detect that.
Actually, it seems that for a few seconds, when the screen is off, data is
still received, then after it stops...
Maybe the internal storage is disabled when the screen is off and takes some
time?..
Thank you
Original comment by victor.n...@gmail.com
on 15 Jan 2011 at 2:06
My detection only waits about 3 seconds before it starts checking for whether
or not the accelerometer is still responding. I will lengthen this delay so
that it catches more devices, but I can't make it too long or else people will
get impatient.
Original comment by jondwil...@gmail.com
on 15 Jan 2011 at 6:22
I have a similar issue with Galaxy S: I can see sensor data during calibration,
but not during actual use. I will try the force screen on option, even though
calibration returns false.
Original comment by natevill...@gmail.com
on 10 Feb 2011 at 8:04
Tried forcing screen on, to no avail. What I did notice is that the graph
updates _sometimes_ after I switch screens, for example, to home screen and
back, or to browser and back. Not repeatable reliably. But I noticed this on
two occasions.
Original comment by natevill...@gmail.com
on 10 Feb 2011 at 8:18
@nate this seems like it could be just the UI not displaying properly. If you
try stopping and saving sleep after monitoring for awhile, it would help me
diagnose what's going on in your case and hopefully find a fix.
Original comment by jondwil...@gmail.com
on 10 Feb 2011 at 1:53
On a related note: I find that if I have my Droid X on the multimedia station
- set up electric sleep - and then change my view to the clock - the only data
that is viewed and saved is the data AFTER I change the view back to electric
sleep.
The notation on the top of the graph shows the time frame from when i first
activated electric sleep through the "stop" or when the alarm goes off - but
the data itself is truncated to only the data collected after going back to the
electric sleep screen.
Perhaps this scenario is playing out here?
Original comment by pegbat...@gmail.com
on 10 Feb 2011 at 8:29
Original comment by jondwil...@gmail.com
on 22 Feb 2011 at 5:19
Original issue reported on code.google.com by
Jeff.Hon...@gmail.com
on 25 Dec 2010 at 1:13