sca075
commented
1 year ago hello @billyourself, thanks for your report. It looks there is an issue on the 1.1.4, I will check the last modification I made recently and release the 1.1.5 within tomorrow. It seams to be an issue with the Image_handler module that should be already fixed on the new release I'm going to publish soon. By the way can you please try to setup the integration via the GUI, (remove the configuration from the yaml / restart home assistant / go on device & services and add integrations setup and search "valetudo" and reboot once again. Please note I tested the integration with the Robock V1, if you are still facing issues with the DreamD9 I will add some additional debug logs so that we can get the json data information on the next version so that we can fix this issue with your robot. Thank you really much for your cooperation.
billyourself
Checklist
The problem
Update for camera.valetudo_vacuum_camera fails.
The entity does not show an image, nor does it with with the Xiaomi Lovelace Vacuum Card.
Configuration has been set up as per instructions and confirmed working with I Can't Believe It's Not Valetudo.
Logs from HA:
2023-07-07 20:21:29.631 DEBUG (Thread-6 (_thread_main)) [custom_components.valetudo_vacuum_camera.valetudo.connector] Connected to MQTT broker. 2023-07-07 20:21:29.632 DEBUG (Thread-6 (_thread_main)) [custom_components.valetudo_vacuum_camera.valetudo.connector] Received data from MQTT 2023-07-07 20:21:34.624 INFO (SyncWorker_4) [custom_components.valetudo_vacuum_camera.camera] camera image update process: True 2023-07-07 20:21:34.624 DEBUG (SyncWorker_4) [custom_components.valetudo_vacuum_camera.valetudo.connector] Processing data from MQTT 2023-07-07 20:21:34.624 DEBUG (SyncWorker_4) [custom_components.valetudo_vacuum_camera.utils.valetudo_jdata] Decoding PNG to JSON 2023-07-07 20:21:34.624 DEBUG (SyncWorker_4) [custom_components.valetudo_vacuum_camera.utils.valetudo_jdata] data grabbed 2023-07-07 20:21:34.624 DEBUG (SyncWorker_4) [custom_components.valetudo_vacuum_camera.utils.valetudo_jdata] Extracting JSON 2023-07-07 20:21:34.903 ERROR (MainThread) [homeassistant.helpers.entity] Update for camera.valetudo_vacuum_camera fails Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 695, in async_update_ha_state await self.async_device_update() File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 942, in async_device_update await hass.async_add_executor_job(self.update) File "/usr/local/lib/python3.11/concurrent/futures/thread.py", line 58, in run result = self.fn(*self.args, **self.kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/config/custom_components/valetudo_vacuum_camera/camera.py", line 184, in update pil_img = self._map_handler.get_image_from_json(parsed_json) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/config/custom_components/valetudo_vacuum_camera/valetudo/image_handler.py", line 344, in get_image_from_json img_np_array = self.draw_zone_clean( ^^^^^^^^^^^^^^^^^^^^^ File "/config/custom_components/valetudo_vacuum_camera/valetudo/image_handler.py", line 229, in draw_zone_clean tot_zones = len(coordinates) - 1 ^^^^^^^^^^^^^^^^ TypeError: object of type 'NoneType' has no len()What version of an integration has described problem?
1.1.4
What was the last working version of an integration?
No response
What vacuum model do you have problems with?
Dreame D9, Valetudo Flashed
Please firmware installed on your Vacuum.
Dreame FW: 1132, Valetudo: DreameD9ValetudoRobot 2023.05.0
What version of Home Assistant do you use?
2023.7.1
What type of installation are you running?
Home Assistant OS
Camera's configuration
Logs or Errors shown in the HA logs (please enable the Debug Mode)
Additional information
No response