Open SgtPhyko opened 5 years ago
Update: builders/blockplacers cant place AE cables propperly ,so so far nothing I tried will solve this issue -> if someone else finds a solution to this pls report here :)
This is really messing with all my automations :/
Hey, it's a bit of a long shot, but it's all I've got; When using those wireless connectors from AE2 Stuff, if you go a bit too far, the power usage will somehow exceed that of what the ME Controller can provide, and causes my system to reboot repeatedly until I remove the wireless thing. If you're using those, check to see if they might be also causing some problems when the server reboots. Otherwise, I would probably just disconnect sections of the network until it doesn't break the P2P on reboot and try to isolate what's causing it if you find it.
Hope that helps... I understand how annoying this would be :s
Ok I used 1 of the Wireless connectors -> removed that one now, we will see if this solved it tomorrow morning .. timing would be right as I placed it round about the time the server updated to the latest version
Update: Nope, removing the wireless connector didnt help -> the p2ps are still not propperly connecting after server restart
i have problems with the p2p channels too. they keep disconnecting and resyncing every few minutes.
Modpack Information
My AE-System runs on many p2p channels. On serverrestart it looses connection to anything behind a p2p.The P2P-ME-thingies do show that they are connected even though nothing else will load behind them - reloading the system by removing and replacing the p2p-cable (on which the channels run) will fix this issue though u have to do that on every restart.
I Invite u to come and see :)
Additional Information