paketb0te
commented
3 years ago Pretty sure this is an issue with the "Transport Layer", (NAPALM -> netmiko).
Are you sure the NAPALM driver you are using works? What if you use nxos instead of nxos_ssh?
Hello, when i execute the netbox importer i receive an error. I think that the error is due to a check of the hostname of the devices in prompt.
Could you help me to fix the problem ?
netbox-netprod-importer import -f devices.yaml -u doperator -p -v DEBUG .... DEBUG: netmiko: read_channel: Ethernet100/1/38 is down (Link not connected) Hardware: 100/1000 Ethernet, address: 30e4.db74.6827 (bia 30e4.db74.6827) MTU 1500 bytes, BW 0 Kbit, DLY 10 usec reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA Port mode is access auto-duplex, auto-speed Beacon is turned off Input flow-control is off, output flow-control is on Switchport monitor is off EtherType is 0x8100 Last link flapped never Last clearing of "show interface" counters never 30 seconds input rate 0 bits/sec, 0 packets/sec 30 seconds output rate 0 bits/sec, 0 packets/sec Load-Interval #2: 5 minute (300 seconds) input rate 0 bps, 0 pps; output rate 0 bps, 0 pps RX 0 unicast packets 0 multicast packets 0 broadcast packets 0 input packets 0 bytes 0 jumbo packets 0 storm suppression bytes 0 runts 0 giants 0 CRC 0 no buffer 0 input error 0 short frame 0 overrun 0 underrun 0 ignored 0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop 0 input with dribble 0 input discard 0 Rx pause TX 0 unicast packets 0 multicast packets 0 broadcast packets 0 output packets 0 bytes 0 jumbo packets 0 output errors 0 collision 0 deferred 0 late collision 0 lost carrier 0 no carrier 0 babble 0 output discard 0 Tx pause 0 interface resets
DEBUG: netmiko: read_channel: DEBUG: netmiko: read_channel: DEBUG: netmiko: write_channel: b'exit\n' ERROR: netbox_importer: Error when polling device Nx5548U-SSC: Search pattern never detected in send_command: Nx5548U-SSC# 100%|██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████| 2/2 [00:14<00:00, 9.69s/it]DEBUG: paramiko.transport: EOF in transport thread 100%|██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████| 2/2 [00
(venv) devnet@ubuntu:/opt/netbox$ python --version Python 3.8.5
(venv) devnet@ubuntu:/opt/netbox$ pip freeze appdirs==1.4.4 asgiref==3.3.1 attrs==20.3.0 bcrypt==3.2.0 cachetools==4.2.0 certifi==2020.12.5 cffi==1.14.4 chardet==4.0.0 ciscoconfparse==1.5.22 click==7.1.2 colorama==0.4.4 coreapi==2.3.3 coreschema==0.0.4 cryptography==3.3.1 defusedxml==0.6.0 Django==3.1.3 django-cacheops==5.1 django-cors-headers==3.5.0 django-debug-toolbar==3.1.1 django-filter==2.4.0 django-js-asset==1.2.2 django-mptt==0.11.0 django-pglocks==1.0.4 django-prometheus==2.1.0 django-rq==2.4.0 django-storages==1.11 django-tables2==2.3.3 django-taggit==1.3.0 django-timezone-field==4.0 djangorestframework==3.12.2 dnspython==2.0.0 drf-yasg==1.20.0 funcy==1.15 future==0.18.2 gunicorn==20.0.4 idna==2.10 inflection==0.5.1 itypes==1.2.0 Jinja2==2.11.2 jsonschema==3.2.0 junos-eznc==2.5.4 lxml==4.6.2 Markdown==3.3.3 MarkupSafe==1.1.1 napalm==3.2.0 ncclient==0.6.9 netaddr==0.8.0 netbox-netprod-importer==0.3.3 netboxapi==1.1.7 netmiko==3.3.2 ntc-templates==1.6.0 packaging==20.8 paramiko==2.7.2 passlib==1.7.4 Pillow==8.0.1 prometheus-client==0.9.0 psycopg2-binary==2.8.6 pycparser==2.20 pycryptodome==3.9.9 pyeapi==0.8.4 PyNaCl==1.4.0 pyparsing==2.4.7 pyrsistent==0.17.3 pyserial==3.5 pytz==2020.4 PyYAML==5.3.1 redis==3.5.3 requests==2.25.1 rq==1.7.0 ruamel.yaml==0.16.12 ruamel.yaml.clib==0.2.2 scp==0.13.3 simplejson==3.17.2 six==1.15.0 sqlparse==0.4.1 svgwrite==1.4 swagger-spec-validator==2.7.3 tenacity==6.3.1 textfsm==1.1.0 tqdm==4.54.1 transitions==0.8.5 uritemplate==3.0.1 urllib3==1.26.2 yamlordereddictloader==0.4.0
(venv) devnet@ubuntu:/opt/netbox$ more devices.yaml Nx5548U-SSC: driver: "nxos_ssh" target: "10.44.141.2"
Nx5548U-FXP: driver: "nxos_ssh" target: "10.44.141.3"