Open gavin-101 opened 1 month ago
how far off is it? can you get a measurement?
Hi, it's not much. I'd estimate 1.5mm to 2mm maximum lower. I've checked a few online images and I think the easiest way to define it is to align the power pins centrally to the floppy ribbon connector. Sony seem to have used a few different power connectors but are close tolerances.
Second image.
For 2x Sony MPF920-E drives I have, the power connector is high on the pcb. It is needing alignment towards the bottom of the pcb to be a simple direct plug-in solution. Slight lifting of the floppy drive power connector and lowering of the pcb power connector by bending the connectors pins before soldering in place is necessary with the current design.