Ninebot G30 STM32 DRV187 in scooterhacking ReFlasher 1.4.2 is corrupted.
You can't turn the scooter off but you can change modes and turn the front light on (back light stays always off). As soon as you move the motor, the motor gets blocked and the back light blinks (like as the scooter is LOCKED) but the motor vibrates very hard and heats up. To turn it off you need to disconnect the XT60. And then flash another file with SHUT
Steps to Reproduce
Stlink the controller as G30 STM32.
Turn on the scooter.
Move motor forward
PureComedi
commented
1 month ago
Scooterhacking Tool
Firmware (SHFW)
Type of issue
Other
Severity of issue
medium (affects usability but has a workaround)
SHUT Version
None
SHFW Version
None
Scooter model
Ninebot G30
Description of the Bug
Ninebot G30 STM32 DRV187 in scooterhacking ReFlasher 1.4.2 is corrupted. You can't turn the scooter off but you can change modes and turn the front light on (back light stays always off). As soon as you move the motor, the motor gets blocked and the back light blinks (like as the scooter is LOCKED) but the motor vibrates very hard and heats up. To turn it off you need to disconnect the XT60. And then flash another file with SHUT
Steps to Reproduce
Stlink the controller as G30 STM32. Turn on the scooter. Move motor forward
Expected vs. Actual Behavior
None
Contact Information
Gianluxx