NormalHuman-Anything
commented
3 months ago it should be. bms cuts charging through charge port when current goes above 1.8A. not software it's hardware design
Open AndreyKrasnov06 opened 4 months ago
NormalHuman-Anything
commented
3 months ago it should be. bms cuts charging through charge port when current goes above 1.8A. not software it's hardware design
Scooterhacking Tool
Firmware (SHFW)
Type of issue
Other
Severity of issue
medium (affects usability but has a workaround)
SHUT Version
SHUT 2.5
SHFW Version
SHFW 133-3.7.2
Scooter model
Ninebot Es2, Es3, Es4
Description of the Bug
When I updated from 133-3.7.1 to 133-3.7.2 my scooter stopped charging on the 4a charger, a red wrench appears briefly and charging restarts.This is not observed on firmware 255-3.7.2, but it does not display the external battery in scootbatt on 255 firmware. Please fix this:(
Steps to Reproduce
1) install SHFW 155-3.7.2
Expected vs. Actual Behavior
Slow charging after update
Contact Information
@MrDreymer (telegram)