issues
search
scotnelson
/
sanguino
Automatically exported from code.google.com/p/sanguino
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
sanguino.cc unavailable
#37
GoogleCodeExporter
opened
8 years ago
1
NUM_DIGITAL_PINS in pins_arduino.h does not include analog pins
#36
GoogleCodeExporter
opened
8 years ago
0
Patch for /sanguino/bootloaders/atmega644p/Makefile
#35
GoogleCodeExporter
opened
8 years ago
0
Serial.begin(speed, config) failure
#34
GoogleCodeExporter
opened
8 years ago
1
Atmega1284p, Sanguino-0023r4, arduino-0023 result in avrdude: stk500_getsync(): not in sync: resp=0x00
#33
GoogleCodeExporter
opened
8 years ago
1
Enabled JTAG in hfuse is preventing the endstop detection for reprap with Marlin to work properly
#32
GoogleCodeExporter
opened
8 years ago
2
Add pin change interrupt definitions (needed for SoftwareSerial).
#31
GoogleCodeExporter
opened
8 years ago
2
Remove programmers.txt from the download.
#30
GoogleCodeExporter
closed
8 years ago
2
Remove core from the distribution.
#29
GoogleCodeExporter
opened
8 years ago
3
SoftSerial support
#28
GoogleCodeExporter
opened
8 years ago
10
Compilation issues with Arduino IDE 1.01 during 'Verify' stage while using Sanguino-0101r1
#27
GoogleCodeExporter
closed
8 years ago
6
lack of internal VREF support
#26
GoogleCodeExporter
closed
8 years ago
2
Cannot install Sanguino to Arduino 1.1 IDE on a Mac
#25
GoogleCodeExporter
closed
8 years ago
2
Support for OneWire 2.1
#24
GoogleCodeExporter
closed
8 years ago
5
ATmega644p UARTS are dead !
#23
GoogleCodeExporter
closed
8 years ago
2
ATmegaBOOT_644P.hex file missing
#22
GoogleCodeExporter
closed
8 years ago
7
Add support for ATmega644 and ATmega644A
#21
GoogleCodeExporter
opened
8 years ago
14
Arduino v1.0 compatibility
#20
GoogleCodeExporter
closed
8 years ago
16
sdfatlib support on sanguino
#19
GoogleCodeExporter
closed
8 years ago
2
Make Sanguino core libraries compatible with Arduino-021
#18
GoogleCodeExporter
closed
8 years ago
9
Add support for the ATMega1284P in Sanguino
#17
GoogleCodeExporter
closed
8 years ago
4
invalid device signature
#16
GoogleCodeExporter
closed
8 years ago
2
NewSoftSerial10c fails to compile on Sanguino-0018r1_1_4
#15
GoogleCodeExporter
closed
8 years ago
4
TWI does not twi_init() correctly in wire/utility/twi.c for atmega644[p]
#14
GoogleCodeExporter
closed
8 years ago
2
bootloader size too big with gcc 4.4 and standard Makefile configuration
#13
GoogleCodeExporter
closed
8 years ago
1
boards.txt has incorrect name for bootloader file
#12
GoogleCodeExporter
closed
8 years ago
3
Serial.read() does not work with Arduino-0018
#11
GoogleCodeExporter
closed
8 years ago
11
Bootloader does not load EEPROM properly
#10
GoogleCodeExporter
closed
8 years ago
1
644P Pin Out Diagram is wrong
#9
GoogleCodeExporter
closed
8 years ago
2
Wire lib not working on ATmega328 after Sanguino install
#8
GoogleCodeExporter
closed
8 years ago
2
arduino 0016- Error building ethernet library
#7
GoogleCodeExporter
closed
8 years ago
1
Document bootloader build process
#6
GoogleCodeExporter
opened
8 years ago
0
SAnguino
#5
GoogleCodeExporter
closed
8 years ago
1
SAnguino
#4
GoogleCodeExporter
closed
8 years ago
1
SAnguino
#3
GoogleCodeExporter
closed
8 years ago
1
Unify bootloaders for 644(p) and 324(p)
#2
GoogleCodeExporter
closed
8 years ago
2
Timer0 interrupt bloated
#1
GoogleCodeExporter
opened
8 years ago
1