sorry for the long delay. I finally got some time in the lab. Here are the example DS2072A captures I promised.
Both channels were connected to the calibrator output. The channels were set to
1x (default setup), but probes were 10x, so the square signal amplitude in the
files appears as 300 mV, not 3 V.
Captures 1 through 5 are using both channels using various time bases and
attenuator settings. Captures 6 and 7 use only a single channel.
Files were saved after a single trigger capture, so both .csv and .wfm
should have exactly the same data.
Most screenshots don't actually show the waveform, but the basic settings can
still be seen on them (as well as in the included .txt files). Not showing the
waveform in the screenshot .png seems to be a common bug in these scopes.
Hi Scott,
sorry for the long delay. I finally got some time in the lab. Here are the example DS2072A captures I promised.
Both channels were connected to the calibrator output. The channels were set to 1x (default setup), but probes were 10x, so the square signal amplitude in the files appears as 300 mV, not 3 V.
Captures 1 through 5 are using both channels using various time bases and attenuator settings. Captures 6 and 7 use only a single channel.
Files were saved after a single trigger capture, so both .csv and .wfm should have exactly the same data.
Most screenshots don't actually show the waveform, but the basic settings can still be seen on them (as well as in the included .txt files). Not showing the waveform in the screenshot .png seems to be a common bug in these scopes.