search

scottrogowski / code2flow

Pretty good call graphs for dynamic languages
MIT License
4.01k stars 296 forks source link

AssertionError raised #61

Closed tanducmai closed 2 years ago

tanducmai commented 2 years ago

My OS: WSL2 Ubuntu.

After I installed this package on Ubuntu using python3 -m pip install code2flow, I try with a python file:

code2flow a.py

The AssertionError is raised:

  File "/home/henry/.local/lib/python3.8/site-packages/code2flow/engine.py", line 725, in code2flow
    raise AssertionError(
AssertionError: Can't generate a flowchart image because neither `dot` nor `dot.exe` was found. Either install graphviz (see the README) or, if you just want an intermediate text file, set your --output file to use a supported text extension: {'json', 'gv', 'dot'}

I tried installing the graphviz package using python3 -m pip installgraphviz`, I received another error:

Building wheels for collected packages: pygraphviz
  Building wheel for pygraphviz (setup.py) ... error
  error: subprocess-exited-with-error

  × python setup.py bdist_wheel did not run successfully.
  │ exit code: 1
  ╰─> [54 lines of output]
      running bdist_wheel
      running build
      running build_py
      creating build
      creating build/lib.linux-x86_64-3.8
      creating build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/graphviz.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/scraper.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/agraph.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/__init__.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/testing.py -> build/lib.linux-x86_64-3.8/pygraphviz
      creating build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_graph.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_layout.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_drawing.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_string.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_repr_mimebundle.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_readwrite.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_attribute_defaults.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_scraper.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_unicode.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_node_attributes.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_clear.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_close.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/__init__.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_subgraph.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_edge_attributes.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_html.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      running egg_info
      writing pygraphviz.egg-info/PKG-INFO
      writing dependency_links to pygraphviz.egg-info/dependency_links.txt
      writing top-level names to pygraphviz.egg-info/top_level.txt
      reading manifest file 'pygraphviz.egg-info/SOURCES.txt'
      reading manifest template 'MANIFEST.in'
      warning: no files found matching '*.png' under directory 'doc'
      warning: no files found matching '*.txt' under directory 'doc'
      warning: no files found matching '*.css' under directory 'doc'
      warning: no previously-included files matching '*~' found anywhere in distribution
      warning: no previously-included files matching '*.pyc' found anywhere in distribution
      warning: no previously-included files matching '.svn' found anywhere in distribution
      no previously-included directories found matching 'doc/build'
      writing manifest file 'pygraphviz.egg-info/SOURCES.txt'
      copying pygraphviz/graphviz.i -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/graphviz_wrap.c -> build/lib.linux-x86_64-3.8/pygraphviz
      running build_ext
      building 'pygraphviz._graphviz' extension
      creating build/temp.linux-x86_64-3.8
      creating build/temp.linux-x86_64-3.8/pygraphviz
      x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.8 -c pygraphviz/graphviz_wrap.c -o build/temp.linux-x86_64-3.8/pygraphviz/graphviz_wrap.o
      pygraphviz/graphviz_wrap.c:2711:10: fatal error: graphviz/cgraph.h: No such file or directory
       2711 | #include "graphviz/cgraph.h"
            |          ^~~~~~~~~~~~~~~~~~~
      compilation terminated.
      error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
      [end of output]

  note: This error originates from a subprocess, and is likely not a problem with pip.
  ERROR: Failed building wheel for pygraphviz
  Running setup.py clean for pygraphviz
Failed to build pygraphviz
Installing collected packages: pygraphviz
  Running setup.py install for pygraphviz ... error
  error: subprocess-exited-with-error

  × Running setup.py install for pygraphviz did not run successfully.
  │ exit code: 1
  ╰─> [54 lines of output]
      running install
      running build
      running build_py
      creating build
      creating build/lib.linux-x86_64-3.8
      creating build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/graphviz.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/scraper.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/agraph.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/__init__.py -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/testing.py -> build/lib.linux-x86_64-3.8/pygraphviz
      creating build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_graph.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_layout.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_drawing.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_string.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_repr_mimebundle.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_readwrite.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_attribute_defaults.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_scraper.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_unicode.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_node_attributes.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_clear.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_close.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/__init__.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_subgraph.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_edge_attributes.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      copying pygraphviz/tests/test_html.py -> build/lib.linux-x86_64-3.8/pygraphviz/tests
      running egg_info
      writing pygraphviz.egg-info/PKG-INFO
      writing dependency_links to pygraphviz.egg-info/dependency_links.txt
      writing top-level names to pygraphviz.egg-info/top_level.txt
      reading manifest file 'pygraphviz.egg-info/SOURCES.txt'
      reading manifest template 'MANIFEST.in'
      warning: no files found matching '*.png' under directory 'doc'
      warning: no files found matching '*.txt' under directory 'doc'
      warning: no files found matching '*.css' under directory 'doc'
      warning: no previously-included files matching '*~' found anywhere in distribution
      warning: no previously-included files matching '*.pyc' found anywhere in distribution
      warning: no previously-included files matching '.svn' found anywhere in distribution
      no previously-included directories found matching 'doc/build'
      writing manifest file 'pygraphviz.egg-info/SOURCES.txt'
      copying pygraphviz/graphviz.i -> build/lib.linux-x86_64-3.8/pygraphviz
      copying pygraphviz/graphviz_wrap.c -> build/lib.linux-x86_64-3.8/pygraphviz
      running build_ext
      building 'pygraphviz._graphviz' extension
      creating build/temp.linux-x86_64-3.8
      creating build/temp.linux-x86_64-3.8/pygraphviz
      x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.8 -c pygraphviz/graphviz_wrap.c -o build/temp.linux-x86_64-3.8/pygraphviz/graphviz_wrap.o
      pygraphviz/graphviz_wrap.c:2711:10: fatal error: graphviz/cgraph.h: No such file or directory
       2711 | #include "graphviz/cgraph.h"
            |          ^~~~~~~~~~~~~~~~~~~
      compilation terminated.
      error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
      [end of output]

  note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure

× Encountered error while trying to install package.
╰─> pygraphviz

note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
scottrogowski commented 2 years ago

So my guess is that you missed installing the Graphviz package (not the pip install but the actual executable). You can install that here https://graphviz.org/download/

Feel free to reopen if this wasn't it