What steps will reproduce the problem?
1. just run as usual...
What is the expected output? What do you see instead?
smatool reading data from inverter is expected but I see following output:
smatool.c line 1657: Read config from config File.
variable=Inverter value=5000TL
variable=BTAddress value=00:80:25:09:B6:B7
variable=BTTimeout value=15
variable=Password value=0000
variable=Config value=/etc/smatool/smatool.conf
variable=File value=/etc/smatool/sma.in.new
variable=Latitude value=50.***(masqueraded)
variable=Longitude value=11.***(masqueraded)
variable=MySqlHost value=localhost
variable=MySqlDatabase value=smatool
variable=MySqlUser value=smatool
variable=MySqlPwd value=*MY*SQL*PW*IS*NOT*PUBLIC*
variable=PVOutputURL value=http://pvoutput.org/service/r1/addstatus.jsp
variable=PVOutputKey value=*MY*KEY*IS*SECRET*
variable=PVOutputSid value=*My*ID*too*
smatool.c line 1661: Override config from command line.
smatool.c line 1666: Read Inverter Settings File.
variable=Inverter value=1600TL
variable=Code1 value=0xd2
variable=Code2 value=0xe1
variable=Code3 value=0x46
variable=Code4 value=0x37
variable=InvCode value=0xFF
variable=InvCode value=
variable=Inverter value=1700TL
variable=Code1 value=0x12
variable=Code2 value=0x1a
variable=Code3 value=0xd9
variable=Code4 value=0x38
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=2000TLHF
variable=Code1 value=0x1b
variable=Code2 value=0xb1
variable=Code3 value=0xa6
variable=Code4 value=0x38
variable=InvCode value=0x83
variable=InvCode value=
variable=Inverter value=2100TL
variable=Code1 value=0x17
variable=Code2 value=0x97
variable=Code3 value=0x51
variable=Code4 value=0x38
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=3000TL
variable=Code1 value=0x32
variable=Code2 value=0x42
variable=Code3 value=0x85
variable=Code4 value=0x38
variable=InvCode value=0x71
variable=InvCode value=
variable=Inverter value=3000TLHF
variable=Code1 value=0x1b
variable=Code2 value=0xb1
variable=Code3 value=0xa6
variable=Code4 value=0x38
variable=InvCode value=0x83
variable=InvCode value=
variable=Inverter value=3000HF
variable=Code1 value=0x74
variable=Code2 value=0xbc
variable=Code3 value=0xdb
variable=Code4 value=0x37
variable=InvCode value=0x83
variable=InvCode value=
variable=Inverter value=3000HF30
variable=Code1 value=0x8d
variable=Code2 value=0xe5
variable=Code3 value=0x51
variable=Code4 value=0x36
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=3600TL
variable=Code1 value=0x5a
variable=Code2 value=0xae
variable=Code3 value=0xdf
variable=Code4 value=0x35
variable=InvCode value=0xe2
variable=InvCode value=
variable=Inverter value=4000TL
variable=Code1 value=0x78
variable=Code2 value=0x21
variable=Code3 value=0xbf
variable=Code4 value=0x3a
variable=InvCode value=0x4e
variable=InvCode value=
variable=Inverter value=4000TL21
variable=Code1 value=0x38
variable=Code2 value=0x4f
variable=Code3 value=0xce
variable=Code4 value=0x35
variable=InvCode value=0x8a
variable=InvCode value=
variable=Inverter value=5000TL
variable=Code1 value=0x3f
variable=Code2 value=0x10
variable=Code3 value=0xfb
variable=Code4 value=0x39
variable=InvCode value=0x4e
variable=InvCode value=
variable=Inverter value=5000TL20
variable=Code1 value=0xAD
variable=Code2 value=0x52
variable=Code3 value=0xB2
variable=Code4 value=0x3A
variable=InvCode value=0x4E
variable=InvCode value=
variable=Inverter value=5000TL21
variable=Code1 value=0xd6
variable=Code2 value=0x12
variable=Code3 value=0x70
variable=Code4 value=0x39
variable=InvCode value=0x8a
variable=InvCode value=
variable=Inverter value=7000
variable=Code1 value=0xcf
variable=Code2 value=0x84
variable=Code3 value=0x84
variable=Code4 value=0x3a
variable=InvCode value=0x63
variable=InvCode value=
variable=Inverter value=8000TL
variable=Code1 value=0x3e
variable=Code2 value=0x8f
variable=Code3 value=0x7c
variable=Code4 value=0x38
variable=InvCode value=0x80
variable=InvCode value=
variable=Inverter value=10000TL
variable=Code1 value=0x69
variable=Code2 value=0x45
variable=Code3 value=0x32
variable=Code4 value=0x39
variable=InvCode value=0x80
variable=InvCode value=
variable=Inverter value=12000TL
variable=Code1 value=0x45
variable=Code2 value=0xaf
variable=Code3 value=0x6e
variable=Code4 value=0x3a
variable=InvCode value=0x80
variable=InvCode value=
variable=Inverter value=XXXXTL
variable=Code1 value=0x99
variable=Code2 value=0x35
variable=Code3 value=0x40
variable=Code4 value=0x36
variable=InvCode value=0x4e
variable=InvCode value=
variable=Inverter value=TEST
variable=Code1 value=0x4c
variable=Code2 value=0x26
variable=Code3 value=0x83
variable=Code4 value=0x3b
variable=InvCode value=0x4e
smatool.c line 1670: Parse ascii config and set switches.
smatool.c line 560: utc=2014-04-22 12:44 local=2014-04-22 14:44 diff 2 hours
smatool.c line 562: localOffset=2.000000
smatool.c line 567: localOffset=2.000000 isdst=1
smatool.c line 573: tzsecs=e11 3601
smatool.c line 576: tzsecs=0e 11
smatool.c line 885: SELECT sunrise FROM Almanac WHERE date=DATE_FORMAT( NOW(),
"%Y-%m-%d" )
smatool.c line 859: SELECT data FROM settings WHERE value='schema'
smatool.c line 921: SELECT DATE_FORMAT( DateTime, "%Y-%m-%d %H:%i:%S" ) FROM
DayData ORDER BY DateTime DESC LIMIT 1
Verbose: Auto set dates from 2000-01-01 00:00:00 to 2014-04-22 14:44:00
smatool.c line 957: SELECT if(sunrise < NOW(),1,0) FROM Almanac WHERE date=
DATE_FORMAT( NOW(), "%Y-%m-%d" )
smatool.c line 965: SELECT if( dd.datetime > al.sunset,1,0) FROM DayData as dd
left join Almanac as al on al.date=DATE(dd.datetime) and al.date=DATE(NOW())
WHERE 1 ORDER BY dd.datetime DESC LIMIT 1
Verbose: SMA Address 00:80:25:09:B6:B7
smatool.c line 1725: Try to connect to SMA inverter via bluetooth.
smatool.c line 1726: datefrom=2000-01-01 00:00:00 dateto=2014-04-22 14:44:00
smatool.c line 1745: conf address B7:B6:9:25:80:0
smatool.c line 1751: # tool to read power production data for SMA solar power
convertors
smatool.c line 1751: # Copyright Wim Hofman 2010
smatool.c line 1751: # Copyright Stephen Collier 2010,2011
smatool.c line 1751: #
smatool.c line 1751: # This program is free software: you can redistribute it
and/or modify
smatool.c line 1751: # it under the terms of the GNU General Public License as
published by
smatool.c line 1751: # the Free Software Foundation, either version 3 of the
License, or
smatool.c line 1751: # (at your option) any later version.
smatool.c line 1751: #
smatool.c line 1751: # This program is distributed in the hope that it will be
useful,
smatool.c line 1751: # but WITHOUT ANY WARRANTY; without even the implied
warranty of
smatool.c line 1751: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the
smatool.c line 1751: # GNU General Public License for more details.
smatool.c line 1751: #
smatool.c line 1751: # You should have received a copy of the GNU General
Public License
smatool.c line 1751: # along with this program. If not, see
<http://www.gnu.org/licenses/>. */
smatool.c line 1751: :init $END; //Can only be run once
smatool.c line 1751: R 7E 1F 00 61 $ADDR 00 00 00 00 00 00 02 00 00 04 70 00
$END;
smatool.c line 1755: [18] 2014-04-22 14:44:00 Waiting for string
[18] 2014-04-22 14:44:00 waiting for: 7e 1f 00 61 b7 b6 09 25 80 00 00 00 00 00
00 00 02 00 00 04 70 00
smatool.c line 1803: [18] 2014-04-22 14:44:00 Waiting for data on rfcomm
header: 7e 1b 00
buf header[1]-3: 65b7b6092580000000000000000200000370000101000000
smatool.c line 465:
Receiving
00000000: .. .. .. .. .. .. .. .. .. .. .. .. 7e 1b 00 65
00000010: b7 b6 09 25 80 00 00 00 00 00 00 00 02 00 00 03
00000020: 70 00 01 01 00 00 00 rr=27
smatool.c line 521:
[18] 2014-04-22 14:44:00 looking for: 7e 1f 00 61 b7 b6 09 25 80 00 00 00 00 00
00 00 02 00 00 04 70 00
[18] 2014-04-22 14:44:00 received: 7e 1b 00 65 b7 b6 09 25 80 00 00 00 00 00
00 00 02 00 00 03 70 00 01 01 00 00 00
smatool.c line 1839: [18] 2014-04-22 14:44:00 Did not find string
header: 7e 1b 00
buf header[1]-3: 65b7b6092580000000000000000200000370000101000000
smatool.c line 465:
Receiving
00000000: .. .. .. .. .. .. .. .. .. .. .. .. 7e 1b 00 65
00000010: b7 b6 09 25 80 00 00 00 00 00 00 00 02 00 00 03
00000020: 70 00 01 01 00 00 00 rr=27
smatool.c line 521:
[18] 2014-04-22 14:44:04 looking for: 7e 1f 00 61 b7 b6 09 25 80 00 00 00 00 00
00 00 02 00 00 04
What version of the product are you using? On what operating system?
latest repo compiled on debian
System Info:
root@ServerName:/etc/smatool# hciconfig
hci0: Type: BR/EDR Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:53212 acl:1360 sco:0 events:988 errors:0
TX bytes:19468 acl:677 sco:0 commands:136 errors:0
root@ServerName:/etc/smatool# hcitool scan
Scanning ...
00:80:25:09:B6:B7 SMA0001d SN: 2100064640 SN2100064640
root@ServerName:/etc/smatool#
root@ServerName:/etc/smatool# lsusb
Bus 002 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle
(HCI mode)
[removed additional lines]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@ServerName:/etc/smatool# uname -a
Linux ServerName 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64
GNU/Linux
I tried another BT dongle without success.
Also on our invoice it says it ould be an SB5000TL but Sunny Data Control says
its an SB5000TL-20
BUT the -20 is a blue colored inverter, isn't it? Ours is red.
Does anyone have a advice for me on how to go further? I tried about 10
different code blocks I found on the issue lists here...
Original issue reported on code.google.com by fsedarka...@gmail.com on 22 Apr 2014 at 12:56
Original issue reported on code.google.com by
fsedarka...@gmail.comon 22 Apr 2014 at 12:56