[Github action] Test submitted yaml configs

[juztas]

for any yaml submitted to this repo https://github.com/sdn-sense/rm-configs, we need to have github action, which checks:

• [ ] Run yaml lint
• [ ] MD5 are not conflicting
• [ ] config check for all required parameters and their values (e.g. bgp not conflicting; interfaces defined, switch defined and ports defined inside FE; vlan-range valid format; ips are valid and ranges valid; qos is valid and points to correct interfaces/names/types

[syedasifraza]

FNAL's main.yaml file changes:

---

general: logLevel: DEBUG sites:

• "T1_US_FNAL" webdomain: "https://cmssense1.fnal.gov:8443" probes: ['https_v4_siterm_2xx', 'icmp_v4'] privatedir: /opt/siterm/config/ T1_US_FNAL: domain: fnal.gov latitude: 41.8384 longitude: 88.2616 plugin: ansible switch:
• "cisconx9" privatedir: /opt/siterm/config/T1_US_FNAL/ year: 2023 cisconx9: vsw: "cisconx9" rst: "cisconx9" rst_enabled: "ipv4,ipv6" private_asn: 64515 vlan_mtu: 9216 ports:
• "Ethernet1/49"
• "Ethernet1/51"
• "Ethernet1/52" vlan_range: [3600-3619] ipv4-address-pool:[10.251.85.0/24,10.251.86.0/24,10.251.87.0/24,10.251.88.0/24,10.251.89.0/24,172.16.3.0/30,172.17.3.0/30,172.18.3.0/30,172.19.3.0/30,172.31.10.0/24,172.31.11.0/24,172.31.12.0/24,172.31.13.0/24,172.31.14.0/24,172.31.15.0/24] ipv6-address-pool:[fc00:3600::0/64,fc00:3601::0/64,fc00:3602::0/64,fc00:3603::0/64,fc00:3604::0/64,fc00:3605::0/64,fc00:3606::0/64,fc00:3607::0/64,fc00:3608::0/64,fc00:3609::0/64,fc00:3610::0/64,fc00:3611::0/64,fc00:3612::0/64,fc00:3613::0/64,fc00:3614::0/64,fc00:3615::0/64,fc00:3616::0/64,fc00:3617::0/64,fc00:3618::0/64,fc00:3619::0/64,fc00:1779::0/64,fc00:1780::0/64,fc00:1781::0/64,fc00:1782::0/64,fc00:1783::0/64,fc00:1784::0/64,fc00:1785::0/64,fc00:1786::0/64,fc00:1787::0/64,fc00:1788::0/64,fc00:1789::0/64,fc00:1790::0/64,fc00:1791::0/64,fc00:1792::0/64,fc00:1793::0/64,fc00:1794::0/64,fc00:1795::0/64,fc00:1796::0/64,fc00:1797::0/64,fc00:1798::0/64,fc00:1799::0/64,fc00:3985::0/64,fc00:3986::0/64,fc00:3987::0/64,fc00:3988::0/64,fc00:3989::0/64] allports: False allvlans: False

[juztas]

@syedasifraza can you please create a pull request here: https://github.com/sdn-sense/rm-configs/blob/master/T1_US_FNAL/FE/main.yaml Thanks!