search

sdr-enthusiasts / docker-radarbox

AirNav RadarBox rbfeeder, multi-architecture (x86_64, arm32v7, arm64)
44 stars 8 forks source link

Watchdog constantly restarting rbfeeder binary #217

Open modrewrite opened 2 months ago

modrewrite commented 2 months ago

Hi, I am running docker-readsb-protobuf + docker-radarbox.

I have a problem with the latest version of docker-radarbox. Suddenly, every few minutes I get this error: [watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary. Is this a known issue?

I'm running docker on an Intel NUC with Ubuntu 22.04.

radarbox container log:

[2024-07-05 20:58:09.674][rbfeeder] [2024-07-05 20:58:09]  Connection with RadarBox24 server OK! Key accepted by server.
[2024-07-05 20:58:09.675][rbfeeder] [2024-07-05 20:58:09]  This is your station serial number: EXTRPIXXXX
[2024-07-05 20:58:39.045][rbfeeder] mlat-client 0.4.2 starting up
[2024-07-05 20:58:39.045][rbfeeder] Listening for Beast-format results connection on port 30105
[2024-07-05 20:58:39.084][rbfeeder] Connected to multilateration server at mlat1.rb24.com:40900, handshaking
[2024-07-05 20:58:39.113][rbfeeder] Server says: 
[2024-07-05 20:58:39.113][rbfeeder] 
[2024-07-05 20:58:39.113][rbfeeder]         AirNav Server
[2024-07-05 20:58:39.113][rbfeeder] 
[2024-07-05 20:58:39.113][rbfeeder]         The multilateration server source code is available under
[2024-07-05 20:58:39.113][rbfeeder]         the terms of the Affero GPL (v3 or later). You may obtain
[2024-07-05 20:58:39.113][rbfeeder]         a copy of this server's source code at the following
[2024-07-05 20:58:39.113][rbfeeder]         location: https://github.com/adsbexchange/mlat-server
[2024-07-05 20:58:39.113][rbfeeder]         
[2024-07-05 20:58:39.114][rbfeeder] Handshake complete: Compression zlib2, UDP transport disabled, Split sync disabled
[2024-07-05 20:58:39.115][rbfeeder] Input connected to 127.0.0.1:32457
[2024-07-05 20:58:39.115][rbfeeder] Input format changed to BEAST, 12MHz clock
[2024-07-05 20:58:39.677][rbfeeder] Beast-format results connection with 127.0.0.1:32004: connection established
[2024-07-05 20:58:58.177][rbfeeder] Accepted Beast-format results connection from ::ffff:172.19.0.6:58282
[2024-07-05 20:59:39.473][rbfeeder] Receiver: connected   454.2 msg/s received       80.0 msg/s processed (18%)
[2024-07-05 20:59:39.473][rbfeeder] Server:   ready         0.0 kB/s from server      0.4 kB/s to server
[2024-07-05 20:59:39.473][rbfeeder] Results:  0.0 positions/minute
[2024-07-05 20:59:39.473][rbfeeder] Aircraft: 1 of 15 Mode S, 17 of 28 ADS-B used
[2024-07-05 21:03:07.657][stats] Packets sent in past 5 minutes: 2725, total packets since container start: 2725
**[2024-07-05 21:03:10.516][watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary**
[2024-07-05 21:03:17.697][rbfeeder] [2024-07-05 21:03:17]  Starting RBFeeder Version 1.0.10 (build 20231120150000)
[2024-07-05 21:03:17.700][rbfeeder] [2024-07-05 21:03:17]  Using configuration file: /etc/rbfeeder.ini
[2024-07-05 21:03:17.700][rbfeeder] [2024-07-05 21:03:17]  Network-mode enabled.
[2024-07-05 21:03:17.701][rbfeeder] [2024-07-05 21:03:17]       Remote host to fetch data: 172.19.0.5
[2024-07-05 21:03:17.701][rbfeeder] [2024-07-05 21:03:17]       Remote port: 30005
[2024-07-05 21:03:17.702][rbfeeder] [2024-07-05 21:03:17]       Remote protocol: BEAST
[2024-07-05 21:03:17.785][rbfeeder] [2024-07-05 21:03:17]  Using GNSS (when available)
[2024-07-05 21:03:17.827][rbfeeder] [2024-07-05 21:03:17]  Start date/time: 2024-07-05 21:03:17
[2024-07-05 21:03:17.926][rbfeeder] [2024-07-05 21:03:17]  Socket for ANRB created. Waiting for connections on port 32088
[2024-07-05 21:03:18.562][rbfeeder] mlat-client 0.4.2 starting up
[2024-07-05 21:03:18.563][rbfeeder] Listening for Beast-format results connection on port 30105
[2024-07-05 21:03:18.598][rbfeeder] Connected to multilateration server at mlat1.rb24.com:40900, handshaking
[2024-07-05 21:03:18.628][rbfeeder] Server says: 
[2024-07-05 21:03:18.628][rbfeeder] 
[2024-07-05 21:03:18.628][rbfeeder]         AirNav Server
[2024-07-05 21:03:18.628][rbfeeder] 
[2024-07-05 21:03:18.628][rbfeeder]         The multilateration server source code is available under
[2024-07-05 21:03:18.628][rbfeeder]         the terms of the Affero GPL (v3 or later). You may obtain
[2024-07-05 21:03:18.628][rbfeeder]         a copy of this server's source code at the following
[2024-07-05 21:03:18.628][rbfeeder]         location: https://github.com/adsbexchange/mlat-server
[2024-07-05 21:03:18.628][rbfeeder]         
[2024-07-05 21:03:18.629][rbfeeder] Handshake complete: Compression zlib2, UDP transport disabled, Split sync disabled
[2024-07-05 21:03:18.629][rbfeeder] Input connected to 127.0.0.1:32457
[2024-07-05 21:03:18.630][rbfeeder] Input format changed to BEAST, 12MHz clock
[2024-07-05 21:03:18.959][rbfeeder] [2024-07-05 21:03:18]  Connection established.
[2024-07-05 21:03:19.082][rbfeeder] [2024-07-05 21:03:19]  Connection with RadarBox24 server OK! Key accepted by server.
[2024-07-05 21:03:19.083][rbfeeder] [2024-07-05 21:03:19]  This is your station serial number: EXTRPIXXXX
[2024-07-05 21:03:19.094][rbfeeder] [2024-07-05 21:03:19]  Client type: Raspberry Pi
[2024-07-05 21:03:19.232][rbfeeder] Beast-format results connection with 127.0.0.1:32004: connection established
[2024-07-05 21:03:47.098][rbfeeder] Accepted Beast-format results connection from ::ffff:172.19.0.6:48956
[2024-07-05 21:04:18.636][rbfeeder] Receiver: connected   458.1 msg/s received       83.8 msg/s processed (18%)
[2024-07-05 21:04:18.636][rbfeeder] Server:   ready         0.0 kB/s from server      0.5 kB/s to server
[2024-07-05 21:04:18.636][rbfeeder] Results:  0.0 positions/minute
[2024-07-05 21:04:18.636][rbfeeder] Aircraft: 1 of 14 Mode S, 22 of 30 ADS-B used
[2024-07-05 21:08:09.168][stats] Packets sent in past 5 minutes: 5304, total packets since container start: 2579
**[2024-07-05 21:08:14.648][watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary**
[2024-07-05 21:08:22.147][rbfeeder] [2024-07-05 21:08:22]  Starting RBFeeder Version 1.0.10 (build 20231120150000)
[2024-07-05 21:08:22.150][rbfeeder] [2024-07-05 21:08:22]  Using configuration file: /etc/rbfeeder.ini
[2024-07-05 21:08:22.151][rbfeeder] [2024-07-05 21:08:22]  Network-mode enabled.
[2024-07-05 21:08:22.151][rbfeeder] [2024-07-05 21:08:22]       Remote host to fetch data: 172.19.0.5
[2024-07-05 21:08:22.152][rbfeeder] [2024-07-05 21:08:22]       Remote port: 30005
[2024-07-05 21:08:22.152][rbfeeder] [2024-07-05 21:08:22]       Remote protocol: BEAST
[2024-07-05 21:08:22.235][rbfeeder] [2024-07-05 21:08:22]  Using GNSS (when available)
[2024-07-05 21:08:22.275][rbfeeder] [2024-07-05 21:08:22]  Start date/time: 2024-07-05 21:08:21
[2024-07-05 21:08:22.369][rbfeeder] [2024-07-05 21:08:22]  Socket for ANRB created. Waiting for connections on port 32088
[2024-07-05 21:08:22.988][rbfeeder] mlat-client 0.4.2 starting up
[2024-07-05 21:08:22.989][rbfeeder] Listening for Beast-format results connection on port 30105
[2024-07-05 21:08:23.036][rbfeeder] Connected to multilateration server at mlat1.rb24.com:40900, handshaking
[2024-07-05 21:08:23.054][rbfeeder] Server says: 
[2024-07-05 21:08:23.054][rbfeeder] 
[2024-07-05 21:08:23.054][rbfeeder]         AirNav Server
[2024-07-05 21:08:23.054][rbfeeder] 
[2024-07-05 21:08:23.054][rbfeeder]         The multilateration server source code is available under
[2024-07-05 21:08:23.054][rbfeeder]         the terms of the Affero GPL (v3 or later). You may obtain
[2024-07-05 21:08:23.054][rbfeeder]         a copy of this server's source code at the following
[2024-07-05 21:08:23.054][rbfeeder]         location: https://github.com/adsbexchange/mlat-server
[2024-07-05 21:08:23.054][rbfeeder]         
[2024-07-05 21:08:23.055][rbfeeder] Handshake complete: Compression zlib2, UDP transport disabled, Split sync disabled
[2024-07-05 21:08:23.055][rbfeeder] Input connected to 127.0.0.1:32457
[2024-07-05 21:08:23.056][rbfeeder] Input format changed to BEAST, 12MHz clock
[2024-07-05 21:08:23.407][rbfeeder] [2024-07-05 21:08:23]  Connection established.
[2024-07-05 21:08:23.526][rbfeeder] [2024-07-05 21:08:23]  Connection with RadarBox24 server OK! Key accepted by server.
[2024-07-05 21:08:23.527][rbfeeder] [2024-07-05 21:08:23]  This is your station serial number: EXTRPIXXXX
[2024-07-05 21:08:23.536][rbfeeder] [2024-07-05 21:08:23]  Client type: Raspberry Pi
[2024-07-05 21:08:23.658][rbfeeder] Beast-format results connection with 127.0.0.1:32004: connection established
[2024-07-05 21:08:51.582][rbfeeder] Accepted Beast-format results connection from ::ffff:172.19.0.6:41378
[2024-07-05 21:09:23.209][rbfeeder] Receiver: connected   324.4 msg/s received      149.4 msg/s processed (46%)
[2024-07-05 21:09:23.209][rbfeeder] Server:   ready         0.0 kB/s from server      0.8 kB/s to server
[2024-07-05 21:09:23.209][rbfeeder] Results:  8.0 positions/minute
[2024-07-05 21:09:23.209][rbfeeder] Aircraft: 2 of 16 Mode S, 18 of 25 ADS-B used
[2024-07-05 21:13:10.921][stats] Packets sent in past 5 minutes: 7491, total packets since container start: 2187
**[2024-07-05 21:13:18.795][watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary**
[2024-07-05 21:13:26.552][rbfeeder] [2024-07-05 21:13:26]  Starting RBFeeder Version 1.0.10 (build 20231120150000)
[2024-07-05 21:13:26.555][rbfeeder] [2024-07-05 21:13:26]  Using configuration file: /etc/rbfeeder.ini
[2024-07-05 21:13:26.555][rbfeeder] [2024-07-05 21:13:26]  Network-mode enabled.
[2024-07-05 21:13:26.556][rbfeeder] [2024-07-05 21:13:26]       Remote host to fetch data: 172.19.0.5
[2024-07-05 21:13:26.556][rbfeeder] [2024-07-05 21:13:26]       Remote port: 30005
[2024-07-05 21:13:26.557][rbfeeder] [2024-07-05 21:13:26]       Remote protocol: BEAST
[2024-07-05 21:13:26.642][rbfeeder] [2024-07-05 21:13:26]  Using GNSS (when available)
[2024-07-05 21:13:26.685][rbfeeder] [2024-07-05 21:13:26]  Start date/time: 2024-07-05 21:13:26
[2024-07-05 21:13:26.778][rbfeeder] [2024-07-05 21:13:26]  Socket for ANRB created. Waiting for connections on port 32088
[2024-07-05 21:13:27.410][rbfeeder] mlat-client 0.4.2 starting up
[2024-07-05 21:13:27.410][rbfeeder] Listening for Beast-format results connection on port 30105
[2024-07-05 21:13:27.459][rbfeeder] Connected to multilateration server at mlat1.rb24.com:40900, handshaking
[2024-07-05 21:13:27.513][rbfeeder] Server says: 
[2024-07-05 21:13:27.513][rbfeeder] 
[2024-07-05 21:13:27.513][rbfeeder]         AirNav Server
[2024-07-05 21:13:27.513][rbfeeder] 
[2024-07-05 21:13:27.513][rbfeeder]         The multilateration server source code is available under
[2024-07-05 21:13:27.513][rbfeeder]         the terms of the Affero GPL (v3 or later). You may obtain
[2024-07-05 21:13:27.513][rbfeeder]         a copy of this server's source code at the following
[2024-07-05 21:13:27.513][rbfeeder]         location: https://github.com/adsbexchange/mlat-server
[2024-07-05 21:13:27.514][rbfeeder]         
[2024-07-05 21:13:27.514][rbfeeder] Handshake complete: Compression zlib2, UDP transport disabled, Split sync disabled
[2024-07-05 21:13:27.515][rbfeeder] Input connected to 127.0.0.1:32457
[2024-07-05 21:13:27.515][rbfeeder] Input format changed to BEAST, 12MHz clock
[2024-07-05 21:13:27.815][rbfeeder] [2024-07-05 21:13:27]  Connection established.
[2024-07-05 21:13:27.949][rbfeeder] [2024-07-05 21:13:27]  Client type: Raspberry Pi
[2024-07-05 21:13:28.033][rbfeeder] [2024-07-05 21:13:28]  Connection with RadarBox24 server OK! Key accepted by server.
[2024-07-05 21:13:28.034][rbfeeder] [2024-07-05 21:13:28]  This is your station serial number: EXTRPIXXXX
[2024-07-05 21:13:28.118][rbfeeder] Beast-format results connection with 127.0.0.1:32004: connection established
[2024-07-05 21:13:55.998][rbfeeder] Accepted Beast-format results connection from ::ffff:172.19.0.6:37666
[2024-07-05 21:14:27.609][rbfeeder] Receiver: connected   392.4 msg/s received      197.9 msg/s processed (50%)
[2024-07-05 21:14:27.609][rbfeeder] Server:   ready         0.0 kB/s from server      1.2 kB/s to server
[2024-07-05 21:14:27.609][rbfeeder] Results:  24.9 positions/minute
[2024-07-05 21:14:27.609][rbfeeder] Aircraft: 3 of 12 Mode S, 20 of 30 ADS-B used
[2024-07-05 21:18:12.964][stats] Packets sent in past 5 minutes: 10001, total packets since container start: 2510
**[2024-07-05 21:18:22.935][watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary**
[2024-07-05 21:18:30.976][rbfeeder] [2024-07-05 21:18:30]  Starting RBFeeder Version 1.0.10 (build 20231120150000)
[2024-07-05 21:18:30.979][rbfeeder] [2024-07-05 21:18:30]  Using configuration file: /etc/rbfeeder.ini
[2024-07-05 21:18:30.980][rbfeeder] [2024-07-05 21:18:30]  Network-mode enabled.
[2024-07-05 21:18:30.981][rbfeeder] [2024-07-05 21:18:30]       Remote host to fetch data: 172.19.0.5
[2024-07-05 21:18:30.981][rbfeeder] [2024-07-05 21:18:30]       Remote port: 30005
[2024-07-05 21:18:30.982][rbfeeder] [2024-07-05 21:18:30]       Remote protocol: BEAST
[2024-07-05 21:18:31.063][rbfeeder] [2024-07-05 21:18:31]  Using GNSS (when available)
[2024-07-05 21:18:31.104][rbfeeder] [2024-07-05 21:18:31]  Start date/time: 2024-07-05 21:18:30
[2024-07-05 21:18:31.200][rbfeeder] [2024-07-05 21:18:31]  Socket for ANRB created. Waiting for connections on port 32088
[2024-07-05 21:18:31.842][rbfeeder] mlat-client 0.4.2 starting up
[2024-07-05 21:18:31.842][rbfeeder] Listening for Beast-format results connection on port 30105
[2024-07-05 21:18:31.903][rbfeeder] Connected to multilateration server at mlat1.rb24.com:40900, handshaking
[2024-07-05 21:18:31.934][rbfeeder] Server says: 
[2024-07-05 21:18:31.934][rbfeeder] 
[2024-07-05 21:18:31.934][rbfeeder]         AirNav Server
[2024-07-05 21:18:31.934][rbfeeder] 
[2024-07-05 21:18:31.934][rbfeeder]         The multilateration server source code is available under
[2024-07-05 21:18:31.934][rbfeeder]         the terms of the Affero GPL (v3 or later). You may obtain
[2024-07-05 21:18:31.934][rbfeeder]         a copy of this server's source code at the following
[2024-07-05 21:18:31.934][rbfeeder]         location: https://github.com/adsbexchange/mlat-server
[2024-07-05 21:18:31.934][rbfeeder]         
[2024-07-05 21:18:31.935][rbfeeder] Handshake complete: Compression zlib2, UDP transport disabled, Split sync disabled
[2024-07-05 21:18:31.935][rbfeeder] Input connected to 127.0.0.1:32457
[2024-07-05 21:18:31.936][rbfeeder] Input format changed to BEAST, 12MHz clock
[2024-07-05 21:18:32.239][rbfeeder] [2024-07-05 21:18:32]  Connection established.
[2024-07-05 21:18:32.357][rbfeeder] [2024-07-05 21:18:32]  Connection with RadarBox24 server OK! Key accepted by server.
[2024-07-05 21:18:32.358][rbfeeder] [2024-07-05 21:18:32]  This is your station serial number: EXTRPIXXXX
[2024-07-05 21:18:32.368][rbfeeder] [2024-07-05 21:18:32]  Client type: Raspberry Pi
[2024-07-05 21:18:32.540][rbfeeder] Beast-format results connection with 127.0.0.1:32004: connection established
[2024-07-05 21:19:00.447][rbfeeder] Accepted Beast-format results connection from ::ffff:172.19.0.6:46576
[2024-07-05 21:19:32.117][rbfeeder] Receiver: connected   429.4 msg/s received      188.8 msg/s processed (44%)
[2024-07-05 21:19:32.117][rbfeeder] Server:   ready         0.0 kB/s from server      1.2 kB/s to server
[2024-07-05 21:19:32.117][rbfeeder] Results:  23.9 positions/minute
[2024-07-05 21:19:32.117][rbfeeder] Aircraft: 3 of 16 Mode S, 18 of 31 ADS-B used
[2024-07-05 21:23:15.219][stats] Packets sent in past 5 minutes: 12832, total packets since container start: 2831
**[2024-07-05 21:23:27.075][watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary**
[2024-07-05 21:23:35.421][rbfeeder] [2024-07-05 21:23:35]  Starting RBFeeder Version 1.0.10 (build 20231120150000)
[2024-07-05 21:23:35.423][rbfeeder] [2024-07-05 21:23:35]  Using configuration file: /etc/rbfeeder.ini
[2024-07-05 21:23:35.424][rbfeeder] [2024-07-05 21:23:35]  Network-mode enabled.
[2024-07-05 21:23:35.424][rbfeeder] [2024-07-05 21:23:35]       Remote host to fetch data: 172.19.0.5
[2024-07-05 21:23:35.424][rbfeeder] [2024-07-05 21:23:35]       Remote port: 30005
[2024-07-05 21:23:35.424][rbfeeder] [2024-07-05 21:23:35]       Remote protocol: BEAST
[2024-07-05 21:23:35.506][rbfeeder] [2024-07-05 21:23:35]  Using GNSS (when available)
[2024-07-05 21:23:35.547][rbfeeder] [2024-07-05 21:23:35]  Start date/time: 2024-07-05 21:23:35
[2024-07-05 21:23:35.636][rbfeeder] [2024-07-05 21:23:35]  Socket for ANRB created. Waiting for connections on port 32088
[2024-07-05 21:23:36.275][rbfeeder] mlat-client 0.4.2 starting up
[2024-07-05 21:23:36.276][rbfeeder] Listening for Beast-format results connection on port 30105
[2024-07-05 21:23:36.329][rbfeeder] Connected to multilateration server at mlat1.rb24.com:40900, handshaking
[2024-07-05 21:23:36.349][rbfeeder] Server says: 
[2024-07-05 21:23:36.349][rbfeeder] 
[2024-07-05 21:23:36.349][rbfeeder]         AirNav Server
[2024-07-05 21:23:36.349][rbfeeder] 
[2024-07-05 21:23:36.349][rbfeeder]         The multilateration server source code is available under
[2024-07-05 21:23:36.349][rbfeeder]         the terms of the Affero GPL (v3 or later). You may obtain
[2024-07-05 21:23:36.349][rbfeeder]         a copy of this server's source code at the following
[2024-07-05 21:23:36.349][rbfeeder]         location: https://github.com/adsbexchange/mlat-server
[2024-07-05 21:23:36.349][rbfeeder]         
[2024-07-05 21:23:36.350][rbfeeder] Handshake complete: Compression zlib2, UDP transport disabled, Split sync disabled
[2024-07-05 21:23:36.350][rbfeeder] Input connected to 127.0.0.1:32457
[2024-07-05 21:23:36.351][rbfeeder] Input format changed to BEAST, 12MHz clock
[2024-07-05 21:23:36.673][rbfeeder] [2024-07-05 21:23:36]  Connection established.
[2024-07-05 21:23:36.810][rbfeeder] [2024-07-05 21:23:36]  Client type: Raspberry Pi
[2024-07-05 21:23:36.891][rbfeeder] [2024-07-05 21:23:36]  Connection with RadarBox24 server OK! Key accepted by server.
[2024-07-05 21:23:36.892][rbfeeder] [2024-07-05 21:23:36]  This is your station serial number: EXTRPIXXXX
[2024-07-05 21:23:36.953][rbfeeder] Beast-format results connection with 127.0.0.1:32004: connection established
[2024-07-05 21:24:04.853][rbfeeder] Accepted Beast-format results connection from ::ffff:172.19.0.6:59764
[2024-07-05 21:24:36.665][rbfeeder] Receiver: connected   394.3 msg/s received       76.6 msg/s processed (19%)
[2024-07-05 21:24:36.665][rbfeeder] Server:   ready         0.0 kB/s from server      0.6 kB/s to server
[2024-07-05 21:24:36.665][rbfeeder] Results:  15.9 positions/minute
[2024-07-05 21:24:36.665][rbfeeder] Aircraft: 2 of 15 Mode S, 17 of 25 ADS-B used
[2024-07-05 21:28:17.703][stats] Packets sent in past 5 minutes: 14940, total packets since container start: 2108
**[2024-07-05 21:28:31.239][watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary**
[2024-07-05 21:28:39.854][rbfeeder] [2024-07-05 21:28:39]  Starting RBFeeder Version 1.0.10 (build 20231120150000)
[2024-07-05 21:28:39.857][rbfeeder] [2024-07-05 21:28:39]  Using configuration file: /etc/rbfeeder.ini
[2024-07-05 21:28:39.857][rbfeeder] [2024-07-05 21:28:39]  Network-mode enabled.
[2024-07-05 21:28:39.858][rbfeeder] [2024-07-05 21:28:39]       Remote host to fetch data: 172.19.0.5
[2024-07-05 21:28:39.858][rbfeeder] [2024-07-05 21:28:39]       Remote port: 30005
[2024-07-05 21:28:39.859][rbfeeder] [2024-07-05 21:28:39]       Remote protocol: BEAST
[2024-07-05 21:28:39.941][rbfeeder] [2024-07-05 21:28:39]  Using GNSS (when available)
[2024-07-05 21:28:39.983][rbfeeder] [2024-07-05 21:28:39]  Start date/time: 2024-07-05 21:28:39
[2024-07-05 21:28:40.077][rbfeeder] [2024-07-05 21:28:40]  Socket for ANRB created. Waiting for connections on port 32088
[2024-07-05 21:28:40.714][rbfeeder] mlat-client 0.4.2 starting up
[2024-07-05 21:28:40.715][rbfeeder] Listening for Beast-format results connection on port 30105
[2024-07-05 21:28:40.766][rbfeeder] Connected to multilateration server at mlat1.rb24.com:40900, handshaking
[2024-07-05 21:28:40.792][rbfeeder] Server says: 
[2024-07-05 21:28:40.792][rbfeeder] 
[2024-07-05 21:28:40.792][rbfeeder]         AirNav Server
[2024-07-05 21:28:40.792][rbfeeder] 
[2024-07-05 21:28:40.792][rbfeeder]         The multilateration server source code is available under
[2024-07-05 21:28:40.792][rbfeeder]         the terms of the Affero GPL (v3 or later). You may obtain
[2024-07-05 21:28:40.792][rbfeeder]         a copy of this server's source code at the following
[2024-07-05 21:28:40.792][rbfeeder]         location: https://github.com/adsbexchange/mlat-server
[2024-07-05 21:28:40.792][rbfeeder]         
[2024-07-05 21:28:40.792][rbfeeder] Handshake complete: Compression zlib2, UDP transport disabled, Split sync disabled
[2024-07-05 21:28:40.793][rbfeeder] Input connected to 127.0.0.1:32457
[2024-07-05 21:28:40.793][rbfeeder] Input format changed to BEAST, 12MHz clock
[2024-07-05 21:28:41.115][rbfeeder] [2024-07-05 21:28:41]  Connection established.
[2024-07-05 21:28:41.233][rbfeeder] [2024-07-05 21:28:41]  Connection with RadarBox24 server OK! Key accepted by server.
[2024-07-05 21:28:41.234][rbfeeder] [2024-07-05 21:28:41]  This is your station serial number: EXTRPIXXXX
[2024-07-05 21:28:41.244][rbfeeder] [2024-07-05 21:28:41]  Client type: Raspberry Pi
[2024-07-05 21:28:41.396][rbfeeder] Beast-format results connection with 127.0.0.1:32004: connection established
[2024-07-05 21:29:09.247][rbfeeder] Accepted Beast-format results connection from ::ffff:172.19.0.6:46392
[2024-07-05 21:29:41.208][rbfeeder] Receiver: connected   297.3 msg/s received       61.2 msg/s processed (21%)
[2024-07-05 21:29:41.208][rbfeeder] Server:   ready         0.0 kB/s from server      0.4 kB/s to server
[2024-07-05 21:29:41.208][rbfeeder] Results:  12.9 positions/minute
[2024-07-05 21:29:41.208][rbfeeder] Aircraft: 1 of 13 Mode S, 16 of 26 ADS-B used
[2024-07-05 21:33:20.186][stats] Packets sent in past 5 minutes: 14148, total packets since container start: 1933
**[2024-07-05 21:33:35.368][watchdog] [WARNING] No packets received from readsb:30005. Restarting rbfeeder binary**

readsb container log:

[readsb] 2024/07/05 21:03:15 Beast TCP output: Receive Error: Connection reset by peer: 172.19.0.9 port 60416 (fd 15, SendQ 0, RecvQ 0)
[readsb] 2024/07/05 21:08:20 Beast TCP output: Receive Error: Connection reset by peer: 172.19.0.9 port 44998 (fd 15, SendQ 0, RecvQ 0)
[readsb] 2024/07/05 21:13:24 Beast TCP output: Receive Error: Connection reset by peer: 172.19.0.9 port 44246 (fd 15, SendQ 0, RecvQ 0)
[readsb] 2024/07/05 21:18:29 Beast TCP output: Receive Error: Connection reset by peer: 172.19.0.9 port 39284 (fd 15, SendQ 0, RecvQ 0)
[readsb] 2024/07/05 21:23:33 Beast TCP output: Receive Error: Connection reset by peer: 172.19.0.9 port 58148 (fd 15, SendQ 0, RecvQ 0)
[readsb] 2024/07/05 21:28:38 Beast TCP output: Receive Error: Connection reset by peer: 172.19.0.9 port 52624 (fd 15, SendQ 0, RecvQ 0)
[readsb] 2024/07/05 21:33:42 Beast TCP output: Receive Error: Connection reset by peer: 172.19.0.9 port 35636 (fd 15, SendQ 0, RecvQ 0)
modrewrite commented 2 months ago

I found a temporary solution. I switched back to build 625, that doesn't have the watchdog feature. Everything is running fine in this build. Please make an option to disable watchdog, or remove it from the 'nohealthcheck'-builds.