search

second-state / how_to_deploy_uniswap

Detailed instructions on how to deploy Uniswap on an Ethereum compatible blockchain
Apache License 2.0
143 stars 94 forks source link

Dex Aggregator #15

Open kelpieinu opened 3 years ago

kelpieinu commented 3 years ago

How do we add in Liquidity Source for 0x, Aave, 1inch or Uniswap V2 etc for more liquidity sources provider rather than just depend on our own liquidity pool?

Something like a DEX Aggregator like 1inch.

Means the swap will always work as long there is token at Uniswap or 0x or Aave, Sushi etc

It should behave like 1inch.

gitcoinbot commented 3 years ago

Issue Status: 1. Open 2. Started 3. Submitted 4. Done

This issue now has a funding of 0.3 ETH (548.63 USD @ $1828.77/ETH) attached to it.

quantum-guy7 commented 3 years ago

@kelpieinu To clarify, u want to know how to add liquidity OR u want to build a DEX Aggregator?

kelpieinu commented 3 years ago

How to build a Dex Aggregator so that there is fallback liquidity and the swap always works.

Thank you

On Wed, 23 Jun 2021 at 01:14, quantum-guy @.***> wrote:

@kelpieinu https://github.com/kelpieinu To clarify, u want to know how to add liquidity OR u want to build a DEX Aggregator?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-866175227, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFHOCXKTVTBFCXVAD7LTUDAGBANCNFSM47ECQP2Q .

gitcoinbot commented 3 years ago

Issue Status: 1. Open 2. Started 3. Submitted 4. Done

Work has been started.

These users each claimed they can complete the work by 265 years, 4 months from now. Please review their action plans below:

1) amalnathsathyan has been approved to start work.

Can I get a clarification?

Here is what I understood:- You want to make an 'liquidity providing aggregator' which can provide liquidity in all sources (like Uniswap, Sushiswap, Aaave, Mooniswap etc..) in an easy way. So that the liquidity won't run out in DEXs. With a single click, the liquidity will automatically be added to intended pools in various DEXs in required amounts. You want to control and monitor the liquidity statistics in all over the DEXs from a single place.

Is that what you want to build? If so let me know your requirements. About:- 1) Do you need the smart contract alone or the UI too?

One more suggestion:- Liquidity won't be an issue if someone is using a dex aggregator like 1inch or 0xProtocol. Even if you add liquidity in Uniswap alone, the swap will work as long as there are enough tokens. You don't need to add it to multiple sources. Or rather you don't need an 'aggregator for liquidity providing'! 2) testinginprod has been approved to start work.

If you are looking for a solution to add liquidity from multiple protocols to increase liquidity. I am confident I can deliver you an MVP of this. Could I get more info from the sources code to see and give you examples 3) dante1223 has applied to start work _(Funders only: approve worker | reject worker)_.

If you just want a simple swap such as using uniswap as liquidity provider, I could provide a smart contract that uses part of uniswap library to execute swap from eth to a token and charges a percentage of the amount transacted as fee on the user. Then you can sample it to use in your application or try 0x pluggable liquidity(not necessary in this situation) 4) dante1223 has applied to start work _(Funders only: approve worker | reject worker)_.

If you just want a simple swap such as using uniswap as liquidity provider, I could provide a smart contract that uses part of uniswap library to execute swap from eth to a token and charges a percentage of the amount transacted as fee on the user. Then you can sample it to use in your application or try 0x pluggable liquidity(not necessary in this situation) 5) damiscosilas has been approved to start work.

I would love to work with you to improve your association

Learn more on the Gitcoin Issue Details page.

amalnathsathyan commented 3 years ago

How to build a Dex Aggregator so that there is fallback liquidity and the swap always works. Thank you … On Wed, 23 Jun 2021 at 01:14, quantum-guy @.***> wrote: @kelpieinu https://github.com/kelpieinu To clarify, u want to know how to add liquidity OR u want to build a DEX Aggregator? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#15 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFHOCXKTVTBFCXVAD7LTUDAGBANCNFSM47ECQP2Q .

From here, I want to ask this too :-

You want to build a new DEX aggregator like 1inch,0x etc. Right ??? Also, you want to know how it works ? I can provide that too. But from the first comment, I have replied to what I understood from that. So these two seem to be two items : (1) DEX Aggregator like 1inch (2) A single click liquidity providing tool

Which one of it exactly you are seeking for ?? Please clarify. We can work on it . ;)

kelpieinu commented 3 years ago

Hi,

(1) DEX Aggregator like 1inch (2) A single click liquidity providing tool (Web Front) Yes

If possible to make some fees off the service providing, like 0.01% of the total sum or to use my ERC20 token as an additional fee payment, so can perform "burn" to the token or make a small fee.

Thank

On Fri, 25 Jun 2021 at 15:01, Amalnath Sathyan @.***> wrote:

How to build a Dex Aggregator so that there is fallback liquidity and the swap always works. Thank you … <#m-6274850758922365413> On Wed, 23 Jun 2021 at 01:14, quantum-guy @.***> wrote: @kelpieinu https://github.com/kelpieinu https://github.com/kelpieinu To clarify, u want to know how to add liquidity OR u want to build a DEX Aggregator? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#15 (comment) https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-866175227>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFHOCXKTVTBFCXVAD7LTUDAGBANCNFSM47ECQP2Q .

From here, I want to ask this too :-

You want to build a new DEX aggregator like 1inch,0x etc. Right ??? Also, you want to know how it works ? I can provide that too. But from the first comment, I have replied to what I understood from that. So these two seem to be two items : (1) DEX Aggregator like 1inch (2) A single click liquidity providing tool

Which one of it exactly you are seeking for ?? Please clarify. We can work on it . ;)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-868272793, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFGPTBNKWE6ZQH4NU23TUQSVBANCNFSM47ECQP2Q .

amalnathsathyan commented 3 years ago

Ok,, like $CHI token of 1INCH ??? https://blog.1inch.io/1inch-introduces-chi-gastoken-d0bd5bb0f92b

kelpieinu commented 3 years ago

Hi Amalnath,

Yes if that is possible, but main thing is still able to perform swap, and earn a fee as a Dex Aggregator.

Thank you

On Fri, 25 Jun 2021 at 16:45, Amalnath Sathyan @.***> wrote:

Ok,, like $CHI token of 1INCH ??? https://blog.1inch.io/1inch-introduces-chi-gastoken-d0bd5bb0f92b

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-868330248, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFHAOU634G6B3FGJQLDTUQ63PANCNFSM47ECQP2Q .

amalnathsathyan commented 3 years ago

Can you please finalise my work? What is your exact requirement?

as per my understanding, You want a (1) Dex aggregator with native fee token

as a suggestion, I would like to say that, Dex aggregator is sufficient in your use case scenario. The swap will work for all the token if you just provide liquidity even in a single dex like uniswap.

amalnathsathyan commented 3 years ago

One more question to ask, do you want to build a fresh dex aggregator or just want to integrate any of the existing ones like 1inch in your going on product ??

kelpieinu commented 3 years ago

Hi Amalnath,

Definitely something that is working and deploy as under my Token Name.

Thank you

On Fri, 25 Jun 2021 at 17:10, Amalnath Sathyan @.***> wrote:

One more question to ask, do you want to build a fresh dex aggregator or just want to integrate any of the existing ones like 1inch in your going on product ??

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-868355836, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFFHDAAPKJUTLNGD26TTURBZZANCNFSM47ECQP2Q .

kelpieinu commented 3 years ago

My Main concern is a Dex Aggregator that swap is working with Aggregator with a few liquidity source provider, I don't need it to be able to add liquidity to many source, of course my own fork can be a liquidity as first option but if no liquidity is found,it will use my backup liquidity which is maybe PancakeSwap + Uniswap for the "search" token just like 1inch.

Thank you

On Fri, 25 Jun 2021 at 17:10, Amalnath Sathyan @.***> wrote:

One more question to ask, do you want to build a fresh dex aggregator or just want to integrate any of the existing ones like 1inch in your going on product ??

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-868355836, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFFHDAAPKJUTLNGD26TTURBZZANCNFSM47ECQP2Q .

amalnathsathyan commented 3 years ago

So let me conclude:- 1.You are forking Uniswap 2.You give liquidity for tokens in this forked Uniswap 3.Along with this, you give some 'backup liquidity' in original Uniswap + Pancakeswap 4.You need a dex aggregator that works with DEXs. 5.That aggregator will mainly use the liquidity in the forked uniswap for swaps. 6.But if that gets exhausted, the aggregator will go for using the backup liquidity.

And my job will be making that aggregator!

kelpieinu commented 3 years ago

Yes correct, to make amendment to the current fork and able to communicate with Pancake and Uniswap as main for perform basic swap functions, means the fork will never fail to perform swap unless there is no liquidity in uniswap or pancake which is not really possible.

Thanks

On Fri, 25 Jun 2021 at 23:27, Amalnath Sathyan @.***> wrote:

So let me conclude:- 1.You are forking Uniswap 2.You give liquidity for tokens in this forked Uniswap 3.Along with this, you give some 'backup liquidity' in original Uniswap + Pancakeswap 4.You need a dex aggregator that works with DEXs. 5.That aggregator will mainly use the liquidity in the forked uniswap for swaps. 6.But if that gets exhausted, the aggregator will go for using the backup liquidity.

And my job will be making that aggregator!

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-868604690, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFFXR54HBEEXSA3E6JTTUSN7VANCNFSM47ECQP2Q .

amalnathsathyan commented 3 years ago

So, what's next? Should start work? Or rather, Where should I start work? Further Directions Please !! Approve Worker

amalnathsathyan commented 3 years ago

Hello, did you fork uniswap ? Any repository of that ? Here is my plan of work :- I think this is sufficient for your functionality. I will fork uniswap. If swap is not done in this one, swap will search for liquidity in original uniswap.

kelpieinu commented 3 years ago

Hi Amalnath Sathyan,

I don't really need a uniswap fork, the main thing is being able to get a referral fee for a working swap (make income , small or big doesn't matter). Just like 1inch, you can't add liquidity in 1inch. It should be a dex aggregator that can perform swapping functionality.

Thank you

On Sat, 26 Jun 2021 at 19:05, Amalnath Sathyan @.***> wrote:

Hello, did you fork uniswap ? Any repository of that ? Here is my plan of work :- I think this is sufficient for your functionality. I will fork uniswap. If swap is not done in this one, swap will search for liquidity in original uniswap.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-868985483, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFGLAPM465VOQIDGREDTUWYAXANCNFSM47ECQP2Q .

kelpieinu commented 3 years ago

Hi Amalnath Sathyan,

It should be something like this: https://hokkfi.com/#/swap

They can swap even though there is no liquidity in their pool, sort of communicating with Uniswap.

Thank you

On Sat, 26 Jun 2021 at 19:05, Amalnath Sathyan @.***> wrote:

Hello, did you fork uniswap ? Any repository of that ? Here is my plan of work :- I think this is sufficient for your functionality. I will fork uniswap. If swap is not done in this one, swap will search for liquidity in original uniswap.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-868985483, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFGLAPM465VOQIDGREDTUWYAXANCNFSM47ECQP2Q .

amalnathsathyan commented 3 years ago

Work Started, will update in 2-3 days

amalnathsathyan commented 3 years ago

One doubt, Should I start in a separate repo of my own or is there any repo where I can create a pull request ???

kelpieinu commented 3 years ago

Hi,

You can do a repo of your own.

Thank you

On Tue, 29 Jun 2021 at 15:38, Amalnath Sathyan @.***> wrote:

One doubt, Should I start in a separate repo of my own or is there any repo where I can create a pull request ???

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-870353001, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFFW7ZV2O3OIUM743HTTVFZ7XANCNFSM47ECQP2Q .

amalnathsathyan commented 3 years ago

Thank You

amalnathsathyan commented 3 years ago

Hi, Do you have any image files like the logo,backgrounds required for the UI ??

I almost working on MVP. UI may be difficult for me. Anyways, keep me posted, if you have any logo or png files required for you dex. Or else, I will decide it myself, no issues. Just asking if you have anything particular in mind.

kelpieinu commented 3 years ago

Hi,

Can do without the background, or similar to Uniswap design. as long its functional.

On Fri, 2 Jul 2021 at 15:50, Amalnath Sathyan @.***> wrote:

Hi, Do you have any image files like the logo,backgrounds required for the UI ??

I almost working on MVP. UI may be difficult for me. Anyways, keep me posted, if you have any logo or png files required for you dex. Or else, I will decide it myself, no issues. Just asking if you have anything particular in mind.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-872795264, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFH6RRXAGVM7PYYNRU3TVVVT7ANCNFSM47ECQP2Q .

Damiscosilas commented 3 years ago

How do we add in Liquidity Source for 0x, Aave, 1inch or Uniswap V2 etc for more liquidity sources provider rather than just depend on our own liquidity pool?

Something like a DEX Aggregator like 1inch.

Means the swap will always work as long there is token at Uniswap or 0x or Aave, Sushi etc

It should behave like 1inch. I would say we choose a legit and trusted site for the addition of liquidity and by that way we try to see Into a small paying site cause some site may be little but scam so let think in doing a site like uniswap for erc20 tokens

Damiscosilas commented 3 years ago

Well

gitcoinbot commented 3 years ago

Issue Status: 1. Open 2. Started 3. Submitted 4. Done

Work for 3.0 ETH (5968.38 USD @ $1991.58/ETH) has been submitted by:

kelpieinu commented 3 years ago

Are you working on it?

On Wed, 14 Jul 2021 at 01:27, Damiscosilas @.***> wrote:

Well

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/second-state/how_to_deploy_uniswap/issues/15#issuecomment-879268986, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUOSXFCMIDJZS7ALQNZ3MMDTXRZRVANCNFSM47ECQP2Q .

amalnathsathyan commented 3 years ago

Work update :- Uniswap fork done. Now on aggregation part. Got an easy way to do that. Will update soon. This is taking longer than I expected. Anyways I think there will be a breakthrough within next two weeks.

I have been working meticulously for last 20 days. But the front end seems hard for me. Will be able to sort it out soon.