seemecnc
commented
10 years ago Seth,
When installing the current version of firmware, I do believe you need to invert the direction of one or more of the motors in the firmware for the V1 Rostock Max.
The image below depicts this section of code in the firmware (this is for the V2)
[image: Inline image 1]
JJ SeeMeCNC
On Thu, Jul 31, 2014 at 4:55 PM, Seth Messer notifications@github.com wrote:
When installing the latest .091 repetier/rostockmax firmware onto a V1 Rostock Max, and home all from mattercontrol OR from repetier-host (both for mac), the Y tower will literally drop all the way down to the bottom of the tower, and the only way to stop it and prevent damage is to shut the printer off.
Of note, I went back to an .091 revision in github from 2/12/2014 (75f0ea5 https://github.com/seemecnc/Repetier-091-ROSTOCKMAX/commit/75f0ea51745fbd716896edb3b0ea53b5f9889666 is the SHA), and the towers worked/acted correctly. I haven't done a git-bisect yet to find the difference. Just wanted to note this as an issue.
— Reply to this email directly or view it on GitHub https://github.com/seemecnc/Repetier-091-ROSTOCKMAX/issues/1.
SeeMeCNC 65695 US Hwy 33 Goshen, Indiana 46526
When installing the latest .091 repetier/rostockmax firmware onto a V1 Rostock Max, and home all from mattercontrol OR from repetier-host (both for mac), the Y tower will literally drop all the way down to the bottom of the tower, and the only way to stop it and prevent damage is to shut the printer off.
Of note, I went back to an .091 revision in github from 2/12/2014 (75f0ea51745 is the SHA), and the towers worked/acted correctly. I haven't done a git-bisect yet to find the difference. Just wanted to note this as an issue.