Open tarkh opened 3 years ago
Dear all, thanks for the great project!
I have indeed the exact same issue (Macbook Air with BCM4360 [14e4:43a0] running Arch Linux). Enabling monitor mode (see in @tarkh post) creates the prism0
interface which is listed as well by iwconfig
and works fine for other applications, eg. wireshark. However, trying tell owl
to use that device via sudo owl -i prism0
fails Error while receiving via netlink: No such device
. I guess I will have to tell owl
somehow to use my actual wifi card wlan0
and prism0
just for monitoring. @schmittner suggests in his comment that this is somehow possible:
A (hacky) idea that I have not tested: You could add a second virtual interface via
iw
and then set one of the interfaces to monitor mode (forowl
) and the other in a "regular" mode, e.g, ad hoc configured with the same BSSID as AWDL. If you run both modes in parallel (probably again depends on driver), the second (ad hoc) interface would have to ACK all incoming frames.
Originally posted by @schmittner in https://github.com/seemoo-lab/owl/issues/9#issuecomment-526109370
Could anyone help me out there? I would really appreciate this, since being able to airdrop on Linux would significantly improve my workflow!
Thanks again and all the best David
I think you should use - N Awl will work But I have no luck to run opendrop
Macbook 2014 with Arch Linux. Can't run OWL with
Netlink operation not supported
error. Network adapter is BCM4360 802.11ac [14e4:43a0] (rev 03) which works fine in both 2,4 and 5 GHz modes, BT also works ok.I've discovered on manpage that you CAN enable monitor mode like this:
echo 1 > /proc/brcm_monitor0
(https://wiki.archlinux.org/title/broadcom_wireless#Setting_broadcom-wl_in_monitor_mode)After this command mew interface
prism0
appears in system (with SAMEMAC
address as BCM4360 interface, usually calledwlp2s0
), which gives you ability to monitor network. So the question is - how can I tell OWL to use this particular device for monitoring function? Thank you!Originally posted by @tarkh in https://github.com/seemoo-lab/owl/issues/24#issuecomment-912476722