Internal intervalometer (Nikon) disables when connected

seiribarra / dslrdashboard

Automatically exported from code.google.com/p/dslrdashboard

0 stars 0 forks source link

Internal intervalometer (Nikon) disables when connected #72

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago

What steps will reproduce the problem?
1. Connect the camera using an OTG cable
2. DSLR dashboard recognizes the camera
3. The Nikon internal intervalometer function becomes greyed out

What is the expected output? What do you see instead?
I would like to be able to use the intervalometer to shoot timelapses, while 
controling the settings with dslrdashboard

What version of the product are you using? On what operating system?
0.30.27 - Android

Please provide any additional information below.

Original issue reported on code.google.com by kevinbou...@gmail.com on 21 Aug 2013 at 7:54

GoogleCodeExporter commented 8 years ago

What camera model, I will check if those properties are accessible in PTP mode.

Original comment by hub...@gmail.com on 21 Aug 2013 at 7:57

GoogleCodeExporter commented 8 years ago

Hello, Nikon D800.
Thanks!

Original comment by kevinbou...@gmail.com on 21 Aug 2013 at 9:04

GoogleCodeExporter commented 8 years ago

Checked the documentation and unfortunately there are no properties to change 
or enable the internal intervalometer. I also tested with D7100 and have the 
same. What I could do is to disconnect the USB cable, start a time-lapse at 
fixed time (like 2 minutes from now) and then plug back the USB cable, then I 
can access the camera and the camera will start the timelpase.

Original comment by hub...@gmail.com on 22 Aug 2013 at 4:21