A web application that allows citizens to "adopt" a storm drain in San Francisco. In use, and in development at other brigades. Looking for a maintainer or someone interested in developing further in collaboration with others across the country.
Moderate severity vulnerability that affects nokogiri
xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.
The Nokogiri RubyGem has patched it's vendored copy of libxml2 in order to prevent this issue from affecting nokogiri.
libxml2 2.9.10 has an infinite loop in a certain end-of-file situation
Nokogiri has backported the patch for CVE-2020-7595 into its vendored version
of libxml2, and released this as v1.10.8
CVE-2020-7595 has not yet been addressed in an upstream libxml2 release, and
so Nokogiri versions <= v1.10.7 are vulnerable.
In Nokogiri versions <= 1.11.0.rc3, XML Schemas parsed by Nokogiri::XML::Schema are trusted by default, allowing external resources to be accessed over the network, potentially enabling XXE or SSRF attacks.
This behavior is counter to the security policy followed by Nokogiri maintainers, which is to treat all input as untrusted by default whenever possible.
Please note that this security fix was pushed into a new minor version, 1.11.x, rather than a patch release to the 1.10.x branch, because it is a breaking change for some schemas and the risk was assessed to be "Low Severity".
Affected Versions
Nokogiri <= 1.10.10 as well as prereleases 1.11.0.rc1, 1.11.0.rc2, and 1.11.0.rc3
Nokogiri::XML::Schema trusts input by default, exposing risk of an XXE vulnerability
Description
In Nokogiri versions <= 1.11.0.rc3, XML Schemas parsed by Nokogiri::XML::Schema
are trusted by default, allowing external resources to be accessed over the
network, potentially enabling XXE or SSRF attacks.
This behavior is counter to
the security policy followed by Nokogiri maintainers, which is to treat all input
as untrusted by default whenever possible.
Please note that this security
fix was pushed into a new minor version, 1.11.x, rather than a patch release to
the 1.10.x branch, because it is a breaking change for some schemas and the risk
was assessed to be "Low Severity".
Affected Versions
Nokogiri <= 1.10.10 as well as prereleases 1.11.0.rc1, 1.11.0.rc2, and 1.11.0.rc3
Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).
Please note that this advisory only applies to the CRuby implementation of Nokogiri < 1.11.4, and only if the packaged version of libxml2 is being used. If you've overridden defaults at installation time to use system libraries instead of packaged libraries, you should instead pay attention to your distro's libxml2 release announcements.
Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).
Please note that this advisory only applies to the CRuby implementation of Nokogiri < 1.11.4, and only if the packaged version of libxml2 is being used. If you've overridden defaults at installation time to use system libraries instead of packaged libraries, you should instead pay attention to your distro's libxml2 release announcements.
[CRuby] DocumentFragment#path now does proper error-checking to handle behavior introduced in libxml > 2.9.10. In v1.11.4 and v1.11.5, calling DocumentFragment#path could result in a segfault.
1.11.5 / 2021-05-19
Fixed
[Windows CRuby] Work around segfault at process exit on Windows when using libxml2 system DLLs.
libxml 2.9.12 introduced new behavior to avoid memory leaks when unloading libxml2 shared libraries (see libxml/!66). Early testing caught this segfault on non-Windows platforms (see #2059 and libxml@956534e) but it was incompletely fixed and is still an issue on Windows platforms that are using system DLLs.
We work around this by configuring libxml2 in this situation to use its default memory management functions. Note that if Nokogiri is not on Windows, or is not using shared system libraries, it will will continue to configure libxml2 to use Ruby's memory management functions. Nokogiri::VERSION_INFO["libxml"]["memory_management"] will allow you to verify when the default memory management functions are being used. [#2241]
Added
Nokogiri::VERSION_INFO["libxml"] now contains the key "memory_management" to declare whether libxml2 is using its default memory management functions, or whether it uses the memory management functions from ruby. See above for more details.
1.11.4 / 2021-05-14
Security
[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:
Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).
[CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)
[CRuby] DocumentFragment#path now does proper error-checking to handle behavior introduced in libxml > 2.9.10. In v1.11.4 and v1.11.5, calling DocumentFragment#path could result in a segfault.
1.11.5 / 2021-05-19
Fixed
[Windows CRuby] Work around segfault at process exit on Windows when using libxml2 system DLLs.
libxml 2.9.12 introduced new behavior to avoid memory leaks when unloading libxml2 shared libraries (see libxml/!66). Early testing caught this segfault on non-Windows platforms (see #2059 and libxml@956534e) but it was incompletely fixed and is still an issue on Windows platforms that are using system DLLs.
We work around this by configuring libxml2 in this situation to use its default memory management functions. Note that if Nokogiri is not on Windows, or is not using shared system libraries, it will will continue to configure libxml2 to use Ruby's memory management functions. Nokogiri::VERSION_INFO["libxml"]["memory_management"] will allow you to verify when the default memory management functions are being used. [#2241]
Added
Nokogiri::VERSION_INFO["libxml"] now contains the key "memory_management" to declare whether libxml2 is using its default memory management functions, or whether it uses the memory management functions from ruby. See above for more details.
1.11.4 / 2021-05-14
Security
[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:
Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).
[CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.
Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
- `@dependabot use these labels` will set the current labels as the default for future PRs for this repo and language
- `@dependabot use these reviewers` will set the current reviewers as the default for future PRs for this repo and language
- `@dependabot use these assignees` will set the current assignees as the default for future PRs for this repo and language
- `@dependabot use this milestone` will set the current milestone as the default for future PRs for this repo and language
- `@dependabot badge me` will comment on this PR with code to add a "Dependabot enabled" badge to your readme
Additionally, you can set the following in your Dependabot [dashboard](https://app.dependabot.com):
- Update frequency (including time of day and day of week)
- Pull request limits (per update run and/or open at any time)
- Automerge options (never/patch/minor, and dev/runtime dependencies)
- Out-of-range updates (receive only lockfile updates, if desired)
- Security updates (receive only security updates, if desired)
Coverage remained the same at 97.931% when pulling a60d9896d121fb66b4eb02e824a9bf036d620074 on dependabot/bundler/nokogiri-1.11.6 into f7fee9544b87b5dd190245c4df7d77b45282304a on master.
Bumps nokogiri from 1.10.7 to 1.11.6. This update includes security fixes.
Vulnerabilities fixed
Sourced from The GitHub Security Advisory Database.
Sourced from The Ruby Advisory Database.
Sourced from The GitHub Security Advisory Database.
... (truncated)
Sourced from The Ruby Advisory Database.
... (truncated)
Sourced from The GitHub Security Advisory Database.
... (truncated)
Sourced from The Ruby Advisory Database.
... (truncated)
Release notes
Sourced from nokogiri's releases.
... (truncated)
Changelog
Sourced from nokogiri's changelog.
... (truncated)
Commits
a48c305
version bump to v1.11.6d7b58c3
Merge pull request #2252 from sparklemotion/2250-doc-frag-path-v1_11_xa1b0e6b
update CHANGELOGd0f14d1
fix: DocumentFragment#path checks for error case in libxml 2.9.11+e43f521
version bump to v1.11.542354e4
Merge pull request #2243 from sparklemotion/flavorjones-v1_11_x-update-tests-...05f30eb
update CHANGELOGe6709aa
windows: work around libxml2 xmlCleanupParser8f54c0f
test: adjust tests to pass on system libxml2 >= 2.9.113d8a570
ci: windows config for github actionsDependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase
.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) - `@dependabot use these labels` will set the current labels as the default for future PRs for this repo and language - `@dependabot use these reviewers` will set the current reviewers as the default for future PRs for this repo and language - `@dependabot use these assignees` will set the current assignees as the default for future PRs for this repo and language - `@dependabot use this milestone` will set the current milestone as the default for future PRs for this repo and language - `@dependabot badge me` will comment on this PR with code to add a "Dependabot enabled" badge to your readme Additionally, you can set the following in your Dependabot [dashboard](https://app.dependabot.com): - Update frequency (including time of day and day of week) - Pull request limits (per update run and/or open at any time) - Automerge options (never/patch/minor, and dev/runtime dependencies) - Out-of-range updates (receive only lockfile updates, if desired) - Security updates (receive only security updates, if desired)