search

sfeakes / AquapureD

Control SWG without control panel. (Hayward Aquarite, Jandy Aquapure, Zodiac TRi)
Other
17 stars 3 forks source link

Check Cell Message #4

Open Kranzy opened 4 years ago

Kranzy commented 4 years ago

Hi @sfeakes

My cell has ticked over the 6000hrs now and is currently showing a message on the SWG displaying 'check cell'.

I haven't seen anything in the docs in aquapured or aquarited that shows this message.

Is there something I can do log wise to see if this data can be read by aquapured? Ill will avoid reseting the hours to remove the error until I hear from you.

Thanks Paul

sfeakes commented 4 years ago

MQTT fullstatus should show check cell message. #8 is check cell, this is the same as clean cell.

https://github.com/sfeakes/AqualinkD/wiki#MQTT

If your not seeing that, can you post the serial_debug logs from AquPureD.

Kranzy commented 4 years ago

noticed in v0.5 onwards the log location is not in the config file anymore. Whats the process to get the serial debug log you need for this? Ill do this before updating to the latest release.

sfeakes commented 4 years ago

Thanks for catching that, the code is there, just forgot an example entry in the config file.

LOG_FILE = /dir/file.log

Kranzy commented 4 years ago

Hi @sfeakes

See attached log.

First part showing no flow was because I didn't turn the SWG on for a while. You'll see the turn on msg, no flow for a little while then generating. The whole time the SWG was on the display was flashing check cell. As I mentioned before it is because the cell hit 6000 hrs run time.

The cell looks in good condition, however I might clean it anyway to see if that's the reason that I am getting a different salt PPM reading between the cell and the tested water. I'll report that in the other issue.

Let me know if you need anymore information. Ill wait to hear from you before I clear the message on the unit.

Aquapure-v0.5.log

Kranzy commented 3 years ago

Just to update I reset the cell counter today, however AquapureD never showed check cell in the fullstatus.